Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Manor, TX | Resolute Chimney Sweep
We provide independent Gelco chimney cleaning across Manor, TX, handling everything from first-fire inspections to glazed creosote removal, and we also cover Gelco in Hornsby Bend. Most Gelco calls we run in Manor come down to one of two things: uncapped prefab chimneys in new subdivisions that have collected nests, or older wood-burning units with creosote that’s hardened through months of disuse. We’re not affiliated with Gelco, but we’ve serviced their factory-built fireplaces and prefab chimney systems long enough to know exactly where they fail in Central Texas heat. Call (877) 644-8036 and we’ll tell you what’s actually going on before we recommend anything.
Why Manor Residents Choose Us for Gelco Service
Gelco builds a solid fireplace, but no factory-built unit survives Texas weather without attention. We’ve opened enough Gelco fireboxes in Manor to know what a healthy unit looks like and what a neglected one sounds like when you tap the firebox panels. That familiarity matters, because a fireplace that sits dormant ten months a year still has metal expanding, contracting, and collecting whatever the wind drops down the flue.
Our owner, Brent Calloway, grew up near the San Gabriel River corridor and has spent well over a decade working on chimney and vent systems around Central Texas. He’s the one who trained our crew to treat every Gelco call as an inspection first and a cleaning second, whether it’s in Manor or Gelco in Elgin. That’s not a sales tactic. It’s the only honest way to service a fireplace that hasn’t been looked at since the home was built. We also stock or can quickly source OEM-quality Gelco dampers, caps, and firebox components, so a Manor homeowner isn’t waiting on a backordered part from a supplier that doesn’t carry what their unit actually needs.
Styles & brands we work with
Common Gelco Chimney Cleaning Problems We Solve in Manor
- Bird and wasp nests in never-used flues. Builders along the US-290 corridor often leave factory-built Gelco chimneys uncapped. In Manor, that means our crew regularly pulls nests out of flues that have never seen a fire. A nest against the damper blocks airflow and can push embers back into the house the first time you light up.
- Glazed creosote in dormant fireboxes. Manor summers bake a Gelco wood-burning unit for months with no fire running through it. Creosote that sits in 100-degree heat doesn’t break down. It hardens into a tar-like glaze that a standard brush sweep won’t remove. We treat it with the right chemicals and mechanical methods, not elbow grease alone.
- Damper and firebox metal fatigue. Older Gelco units in Manor’s original ranch homes have cycled through decades of heating and cooling. We see dampers that no longer seat flush and firebox panels with hairline cracks you can’t spot from the hearth. A Level 2 inspection catches these before they compromise the unit.
- Water intrusion at caps and flashing. Tract-built homes settle, and flashing around a Gelco chimney cap shifts with them. Once water gets in, the chimney chase rusts from the inside out. Manor’s storm season doesn’t help. We check cap seals and flashing as part of every cleaning.
- Missing or damaged spark caps. A Gelco prefab chimney without a proper cap is an open invitation, not just to animals but to rain and wind-driven debris. We install Gelco-compatible multi-flue caps that block both without strangling the draft.
Gelco Service in Manor: What Local Conditions Mean for Your Equipment
Here’s something you won’t read on a generic Gelco page: in Manor’s new subdivisions along the US-290 corridor, we routinely service Gelco prefab chimneys that have never had a fire lit in them. These homes are built fast, and the chimney caps are often an afterthought. On a new-build street off US-290, we opened a Gelco factory-built fireplace that had never been used and found a fully formed bird nest wedged against the damper. We pulled the nest, swept the flue, and installed a Gelco-compatible multi-flue cap, then walked the homeowner through a Level 2 inspection report showing the chimney was otherwise clean and ready for its first fire. That’s not a rare find in this part of Manor. That’s a Tuesday. If you bought a new home here, assume the flue has collected something it shouldn’t have until proven otherwise.
Gelco Models & Products We Service in Manor
Our crew services the full Gelco range you’re likely to find in Manor homes: factory-built wood-burning fireplaces with prefab metal chimneys, direct-vent gas units, decorative inserts, and multi-flue cap assemblies, and we handle Gelco repair in Windemere too. When a part needs replacing, we use OEM or equal-quality aftermarket components, selected for fit and what makes sense for the unit. We don’t put hardware-store generic parts into a Gelco fireplace and call it done. For dampers, caps, and firebox components, we carry common fitments in our service vehicles so a Manor repair doesn’t drag across two weeks waiting on freight.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Manor
What you’ll pay depends on the unit, its condition, and what we find. A straightforward sweep and inspection on a Gelco fireplace in Manor typically runs the standard $180 to $340 range. Cap installation, glazed creosote treatment, or firebox repairs add to that, but every estimate is laid out before work starts, not after we’ve surprised you. Our free estimate covers the inspection and a straight answer on what the unit needs now versus what can wait. Call (877) 644-8036 for an exact quote, including cap work and any Level 2 inspection your situation calls for.
Serving Manor, TX — Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Manor
Yes. Most of our Gelco calls in Manor come from the US-290 corridor subdivisions, and those factory-built units are some of the easiest to service when caught early. Call (877) 644-8036 and let us know the model and the street, and we’ll tell you what to expect before we arrive.
Yes, and in Manor it’s especially important because builders often leave factory-built chimneys uncapped. An unused flue is a nesting site. We’ve pulled bird and wasp nests from Gelco chimneys in Manor that had never held a fire, so an inspection before your first burn is cheap insurance against a blocked draft.
The long, hot off-season lets creosote harden into a glaze that a standard brush can’t remove. Instead of flaking off, it clings to the flue and becomes a fire risk. We treat glazed deposits with the right removal methods and can advise on seasonal usage. Give us a call at (877) 644-8036 if your fireplace has been dormant for a full Manor summer.
Yes. We install Gelco-compatible caps that fit the existing flue configuration and keep birds, wasps, and rain out without killing the draft. A missing cap on a Manor home usually means we’re also checking for water damage under the flashing while we’re up there.
We repair when the unit is structurally sound and the repair cost makes sense. If a Gelco firebox has cracked panels or a damper that’s rusted past seating, we’ll tell you plainly whether replacement is the better call. We don’t sell new units, so the recommendation is based on what’s in front of us, not a commission. Call (877) 644-8036 for an honest assessment.
Service Areas Near Manor
In addition to Manor itself, our Gelco chimney cleaning service reaches Georgetown, Serenada, Round Rock, Brushy Creek, Hutto, and Leander. We also provide Gelco service in Lago Vista and Gelco service in West Lake Hills for homeowners on the other side of Travis County.
For broader coverage details, visit our Manor service area page. And if you want to understand the full scope of our factory-built fireplace work, see our Gelco sales & service overview.
Book Your Gelco Service in Manor Today
If you’ve got a Gelco fireplace in Manor that’s never been checked or hasn’t been swept in years, don’t wait for the first cold snap to find out the flue is blocked. Call (877) 644-8036 and we’ll get it inspected, cleaned, and capped if needed. Estimates are free, and we’ll show you what we found before any work is approved.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Manor and Central Texas. The chimney doesn’t care how long it’s been since the last cleaning – but the creosote does.