Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Hudson Bend, TX
Chimney repair in Hudson Bend usually comes down to one of two things: moisture damage from long stretches of disuse, or wildlife damage from the Hill Country. A lakehouse that sits closed up from spring through fall doesn’t just collect dust. It collects raccoons, wasps, and creosote that hardens into a glaze in the humidity. We see cracked crowns, missing caps, and damaged prefab flues more often than any open-masonry problem. Resolute Chimney Sweep has served Hudson Bend since 2014, and most of our repair work here starts with a discovery during a sweep, not a homeowner calling about a known problem. Call (877) 644-8036 when you want the repair done with the right material, not a hardware-store patch.
Why Hudson Bend Homes Are Different
Hudson Bend sits right on the Lake Travis shoreline, and that location shapes the chimney work more than any other factor. A big share of the homes here are second homes, vacation rentals, and part-time residences. That means flues sit unused for most of the year, which is exactly when creosote cures into a hard, glossy layer that a basic brushing won’t remove. It’s also when nesting critters find their way in. Technicians in this area routinely pull bird nests, wasp nests, and raccoon debris out of flues, and find caps missing or bent after Hill Country wind events. The first visit at a Hudson Bend home is as much a wildlife-and-cap inspection as it is a sweep.
The housing stock adds another layer. We work on a mix of 1970s through 1990s lakefront and hillside custom homes, many built on slabs or piers with manufactured stone fireplaces and prefab metal flue inserts, plus a growing number of newer upscale builds. Those prefab inserts and stone surrounds common in the older lake houses need manufacturer-specific cleaning and inspection methods, not the open-masonry approach a lot of crews default to. The long, hot, humid summers followed by mild winters mean fireplaces go cold for months, then suddenly work hard at the first cold snap and around the holidays. That cycle is tough on flue systems and it’s why we treat Hudson Bend inspections as a real diagnostic pass, not a formality.
Styles & brands we work with
Our Main Hudson Bend Services
Most Hudson Bend homeowners call us first for one of two things: a chimney that needs cleaning after sitting unused, or a dryer vent that’s become a fire hazard without anyone noticing. Both are combustion and exhaust safety issues, and both get the same level of attention from our crew.
Chimney Sweep in Hudson Bend
A sweep in Hudson Bend starts with the assumption that something has been living in the flue, because at a part-time lakehouse, something usually has. We remove nesting material, inspect the cap and crown, then clean the flue to the right standard for whatever system the home has, masonry or prefab. The mild winters mean the surge hits fast when temperatures drop, so scheduling ahead of the first cold snap saves a lot of waiting. Chimney Sweep in Hudson Bend is our full service page for this area, with details on what the cleaning includes and what we check as part of it.
Dryer Vent Cleaning in Hudson Bend
Dryer vents in Hudson Bend homes often run long distances through walls or under floors because of how hillside and slab construction works, and that makes them a real lint-trapping risk. A vent that’s never been cleaned builds up lint that can ignite, and the humid lake air can make the buildup worse by clumping it. We clean the full run, replace or resecure the termination cap, and report what we find with photos. Dryer Vent Cleaning in Hudson Bend covers the full scope of that service.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Hudson Bend
Most chimney repairs in Hudson Bend are either water-damage jobs from wind-driven rain on the lake side, or wildlife-access jobs where a missing cap let in more than just water. The prefab metal flue inserts in older lakehouses corrode and separate at the joints, and stone surrounds crack as hillside piers shift through wet and dry cycles. We scope the flue with a camera, show you the damage on a screen, and quote the repair based on what’s actually there. For the full scope of our repair capability, see our Chimney Repair hub page.
Chimney Cap Installation
Signs you need it
You see daylight through the top of the flue, hear birds or raccoons above the damper, or find nesting debris at the firebox floor.
What it costs in Hudson Bend
A new cap in Hudson Bend typically runs $220 to $480 installed, depending on flue size and whether the chase top needs a custom-fit piece.
How we do it
We measure the flue or chase, set a stainless or copper cap that locks down against Hill Country wind, and seal it so it stays put through the next storm season.
Chimney Liner Installation
Signs you need it
You see flue tile pieces in the firebox, a camera scope shows cracked or separating liner joints, or the home has a gas appliance venting into an unlined flue.
What it costs in Hudson Bend
A liner install in Hudson Bend runs $2,200 to $4,800 on average, and specific DuraFlex liner systems for this area quote in the $2,300 to $3,950 range.
How we do it
We size the liner to the flue and appliance, run it from the connection up through the crown, insulate where code requires it, and secure the top plate and cap.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the fireplace, damp drywall around the chimney chase, or the existing flashing has lifted or pulled away from the roofline.
What it costs in Hudson Bend
Flashing repair in Hudson Bend usually runs $380 to $1,200 depending on how much of the step and counter flashing has to come out and be replaced.
How we do it
We pull the damaged flashing, check the substrate underneath, then fit and seal new step flashing and counter flashing so water sheds away from the penetration.
What Chimney Repair Costs in Hudson Bend
| Item | Typical range in Hudson Bend |
|---|---|
| Chimney cap installation | $220 – $480 |
| Chimney liner installation | $2,300 – $3,950 |
| Chimney flashing repair | $380 – $1,200 |
Do I really need a new liner if the old one looks fine from the top?
You can’t tell from the top. Cracks and separations usually show up mid-flue, where the heat and creosote work on joints. We scope every liner before recommending replacement, and you’ll see the footage yourself before any work is quoted.
How does lake humidity affect chimney repair?
Humidity accelerates corrosion on metal flue components and keeps masonry damp longer after rain, so cracks widen faster than they would in a drier climate. Repairs here need materials and seals rated for that moisture load. Call (877) 644-8036 for an exact quote on your repair.
Brands We Service in Hudson Bend
We stock and install professional-grade components from HeatShield, Gelco, and Olympia Chimney, along with other lines we’ve tested in the field. That means a repair on your Hudson Bend chimney gets the same part a certified chimney professional would specify, not a generic substitute. See our brands for the full list of what we work with.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Hudson Bend, TX
| Service | Typical range in Hudson Bend |
|---|---|
| Chimney sweep and inspection | $180 – $320 |
| Dryer vent cleaning | $110 – $220 |
| Chimney cap installation | $220 – $480 |
| Chimney cap replacement | $230 – $500 |
| Chimney liner installation | $2,300 – $3,950 |
| Chimney flashing repair | $380 – $1,200 |
| Chimney crown repair | $450 – $1,400 |
| Masonry repair | $30 – $60 per square foot |
Two things push prices up in Hudson Bend: access and wildlife damage. A hillside chimney that needs scaffolding or a steep roof pitch costs more to work on than a slab-level fireplace at ground grade, and a raccoon-den cleanup often means cap replacement plus liner inspection on top of the sweep. Every quote is a flat price agreed before we start, so you know the full cost before any work begins.
Neighborhoods We Serve in Hudson Bend
Our service area covers all of the 78645 ZIP code and the surrounding Lake Travis communities. Response time is typically within a few business days, with priority scheduling for homes that have been sitting shut and need cleaning before the first fire of the season.
- Hudson Bend proper
- Lakeway-adjacent hillside streets
- Lago Vista side of the lake
- Briarcliff
- Jonestown
Service Area – Cities Near Hudson Bend
We work across the Lake Travis corridor, so if you’re in a neighboring community, the same crew covers your area. We regularly serve Jonestown, TX, Lago Vista, TX, Briarcliff, TX, and Leander, TX. Scheduling works the same way in all of them: a set appointment, a flat quote, and the job done without referrals to another company.
Serving Hudson Bend, TX — Our Local Coverage Area
We’re based in the Hudson Bend area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Hudson Bend
We schedule sweeps and repairs within a few business days during the fall rush, and we reserve priority slots for homes that have been closed up for months and need a full inspection before lighting anything. Call (877) 644-8036 and we’ll get you on the schedule.
Most chimney repairs in Hudson Bend don’t require a separate permit, but some lakefront communities have HOA rules about exterior cap styles and visible flue components. We’re familiar with the common restrictions along the Lake Travis shoreline and can flag anything that might need board approval before we start.
Yes, and those are some of the most common jobs we do in Hudson Bend. We’re set up to work with property managers and absentee owners, with photo reports sent after every visit so you can see the condition of the flue, cap, and liner without being on site. Call (877) 644-8036 to schedule a rental property inspection.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hudson Bend Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Rana Khalil"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Scott Fletcher"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Beatriz Guzman