Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Windemere, TX
Chimney repair in Windemere most often means correcting cracked clay tile liners, deteriorated mortar crowns, or flashing failures caused by Central Texas temperature swings. Resolute Chimney Sweep has served Windemere since 2014, and we do the full scope: cleaning, inspection, and specification-grade repair using DuraFlex, HeatShield, and Copperfield components. When a sweep turns up structural damage, the same crew that found it fixes it. Call (877) 644-8036 for a free estimate.
Why Windemere Homes Are Different
Windemere’s housing stock splits into two eras, and each one keeps our technicians on their toes. The mid-century ranch homes carry original masonry fireplaces with clay tile liners, and after fifty or sixty years of Central Texas heat followed by occasional hard freezes, those tiles crack. Once a flue liner cracks, the chimney is no longer safely containing heat and combustion gases, and the fix is either a DuraFlex stainless liner or a HeatShield resurfacing, depending on what the camera inspection shows. The newer custom builds tend to have prefab metal fireplaces or gas inserts, which bring their own service needs: different clearances, different venting, and a much tighter tolerance for creosote accumulation.
Limestone dust is a factor our techs see consistently in Windemere. It settles into the chimney between uses, mixes with creosote, and creates a denser, harder deposit than you find in wetter climates. Homes here also pick up cedar pollen in the flue during the spring, which adds to the combustible load. Add in the fact that many Windemere homeowners burn only a few times a year, and a standard sweep often turns into a removal job: bird nests, wasp nests, and heavy soot that has had months to harden. The local pattern is not neglect, it is seasonal use, and the remedy is a thorough mechanical sweep plus an inspection that checks the parts of the chimney that never see daylight.
Styles & brands we work with
Our Main Windemere Services
Most calls we take in Windemere start with one of two concerns: a fireplace that has not been cleaned in years, or a dryer vent that has never been cleaned. Both are fire-safety issues, and both are jobs we handle on the same service route.
Chimney Sweep in Windemere
A full chimney sweep in Windemere removes creosote, soot, and whatever the Texas wildlife has deposited since the last burn. Our techs brush the full flue length, vacuum with a HEPA-fitted unit, and then run a camera inspection so you can see the condition of the liner with your own eyes. Given the limestone dust and cedar pollen that gather in Windemere chimneys, a sweep that only knocks loose surface soot is not enough. We leave the flue clean and you with a photo report of anything that needs attention. For the full service breakdown, see Chimney Sweep in Windemere.
Dryer Vent Cleaning in Windemere
Dryer vents and chimneys share the same stakes: if the exhaust path is blocked, heat and flammable lint build up until something ignites. In Windemere, dryer vents run through hot attics and long wall cavities, and lint plus dust from the limestone soil can compact into a plug faster than homeowners expect. We clean the full duct run from the dryer connection to the exterior termination, verify airflow, and tell you plainly if the vent itself needs repair or re-routing. Dryer Vent Cleaning in Windemere covers the process and local pricing.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Windemere
Chimney repair in Windemere is most often the result of clay tile liners cracking after decades of Texas temperature swings, or mortar crowns and flashing failing and letting moisture into the masonry. A cracked liner is not a cosmetic issue: it exposes the chimney structure to heat and gases that should be contained inside the flue, and it becomes a fire and carbon monoxide risk. In Windemere’s older ranch homes, we commonly find cracked tiles during a routine sweep, and because we stock DuraFlex liner systems and HeatShield resurfacing materials, the repair happens without a second company or a second opinion. Find our full repair scope at Chimney Repair.
Chimney Cap Installation
Signs you need it
The chimney has no cap, a rusted cap, or an animal has made a home in the flue.
What it costs in Windemere
Chimney cap installation in Windemere typically runs $250 to $600 depending on flue size and material.
How we do it
We measure the flue opening, install a stainless or copper cap with proper fasteners, and verify clearance for draft.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, missing bars, or no longer sized to the flue after a liner replacement.
What it costs in Windemere
Chimney cap replacement in Windemere generally costs $300 to $650 installed.
How we do it
We remove the old cap, inspect the flue crown for damage, and mount a new cap matched to the liner size.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked, missing, or deteriorated clay tiles, or you are converting to a gas appliance that requires a properly sized liner.
What it costs in Windemere
Chimney liner installation in Windemere ranges from $2,500 to $5,500 depending on flue height and liner material.
How we do it
We size a DuraFlex stainless liner to the appliance and flue dimensions, insulation-wrap where code requires, and pull it in from the crown.
Chimney Flashing Repair
Signs you need it
Water stains appear on the ceiling near the fireplace or the flashing is pulling away from the roofline.
What it costs in Windemere
Chimney flashing repair in Windemere typically costs $400 to $900 depending on access and the extent of the replacement.
How we do it
We cut out the failed flashing, replace it with proper step and counter flashing, and seal the transition with high-temperature roof-rated sealant.
Chimney Crown Repair
Signs you need it
The mortar crown is cracked, spalling, or shows a depression where water pools instead of shedding.
What it costs in Windemere
Chimney crown repair in Windemere runs $350 to $800 for a standard rebuild or resurfacing.
How we do it
We remove deteriorated mortar, build the crown with a proper slope and drip edge, and seal it so water runs off instead of soaking in.
What Chimney Repair Costs in Windemere
| Item | Typical range in Windemere |
|---|---|
| Chimney cap installation | $250 – $600 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $400 – $900 |
How often should a Windemere chimney be inspected after a repair?
We recommend an annual inspection after any structural repair, especially in Windemere where temperature swings keep working on masonry joints. A quick camera check confirms the repair is holding. Call (877) 644-8036 to schedule.
Can a cracked liner in a Windemere home be fixed without a full replacement?
In many cases, yes. HeatShield resurfacing can restore a liner with minor cracking instead of a full tear-out, and it is a repair we perform on Windemere homes regularly. Call (877) 644-8036 for an evaluation.
Brands We Service in Windemere
Repairs in Windemere are built from professional-grade parts we stand behind: DuraFlex liner systems, HeatShield resurfacing products, and Copperfield caps and accessories. We keep common Windemere sizes and components on the truck, which shortens the repair timeline for most jobs. See our brands for the full list and what each one is specified for.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Windemere, TX
| Service | Typical range in Windemere |
|---|---|
| Chimney cap installation | $250 – $600 |
| Chimney cap replacement | $300 – $650 |
| Chimney liner installation | $2,500 – $5,500 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $350 – $800 |
| Fireplace damper repair | $250 – $500 |
| Chimney crown rebuild | $800 – $1,500 |
| Chimney chase cover | $450 – $1,200 |
In Windemere, two factors push chimney repair pricing above the base range. Flue access on steep roof pitches or multi-story custom builds adds labor time, and older ranch homes often need additional masonry prep before a liner or cap can be installed. Resolute gives every Windemere customer a fixed price in writing before work starts, and that price does not change after we open up the chimney.
Neighborhoods We Serve in Windemere
We cover all of Windemere’s 78764 ZIP, from the original ranch subdivisions to the newest custom builds on the edges of the community. Our technicians know the local chimney profiles well enough to arrive with the right tools on the first visit.
- Windemere Ranch
- Windemere Park
- Lake Windemere
- Windemere Estates
- Windemere Commons
Typical response time across the Windemere area is one to three business days for non-emergency repair scheduling.
Service Area – Cities Near Windemere
Resolute Chimney Sweep runs service routes from our base in Georgetown, and Windemere sits within our regular coverage area. We also serve homeowners in Wells Branch, TX, Pflugerville, TX, Anderson Mill, TX, and Jollyville, TX. If you are just outside Windemere, call and we will confirm coverage and schedule a visit.
Serving Windemere, TX — Our Local Coverage Area
We’re based in the Windemere area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Windemere
Most chimney repairs in Windemere, including liner installation, cap replacement, and crown repair, do not require a permit when we are restoring an existing system rather than adding a new one. If your repair involves structural masonry rebuilding, we will tell you during the estimate whether permitting applies. Call (877) 644-8036 and we will check your specific project.
For most Windemere addresses we schedule within one to three business days. If a camera inspection reveals an urgent liner or flashing problem, we prioritize that repair because the house is not safe to operate the fireplace in the meantime. Call (877) 644-8036 for current scheduling.
We work with Windemere homeowners to keep chimney work within HOA appearance rules, especially for cap installations and chase covers. If your community has a required material or finish, tell us at the estimate and we will spec the right part before ordering. Call (877) 644-8036.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Windemere Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Gabriela Castillo"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
— Eduardo Reyes"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Rami Haddad