Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Manor, TX
Chimney repair in Manor most often comes down to two things: the age of your house and whether anyone ever capped the flue. Homes here split between mid-century brick ranch houses with full masonry chimneys and new subdivisions where factory-built units were left open to Texas weather. Resolute Chimney Sweep handles both, and we’ve served Manor since 2014. If you’re seeing water stains near the fireplace, hearing birds in the flue, or smelling smoke after a fire burns out, call (877) 644-8036 and we’ll tell you what’s actually happening.
Why Manor Homes Are Different
Manor sits in the fast-growing stretch of Travis County along the US-290 corridor, and the housing tells two completely different stories. The older ranch homes on large rural lots, many built between the 1960s and 1980s, have true brick masonry chimneys with clay tile liners. Those liners crack. Mortar joints loosen. Crowns built fifty years ago were often poured too thin, and now they’re spalling under Central Texas sun and rain. The new subdivisions are a different animal. Builders put in factory-built metal chimneys and frequently walk away without installing a cap. Flues that have never seen a fire become nesting boxes for grackles, starlings, and wasps. Hard freezes in January and February, however brief, put thermal shock on both types of systems. When we arrive at a Manor property, we know which set of problems we’re likely to find before we set up the ladder.
Styles & brands we work with
Our Main Manor Services
Two calls dominate our schedule in Manor: chimney sweeping for wood-burning fireplaces and dryer vent cleaning for the laundry exhaust systems that run constantly in Texas households. Each one has its own page here with full detail.
Chimney Sweep in Manor
A Chimney Sweep in Manor involves removing creosote and debris from the flue, inspecting the liner and crown, and checking the damper and firebox for anything that’s changed since the last burn season. In Manor, we commonly find hardened creosote that baked in during the last cold snap and sat untouched through a humid summer. We also pull nests from uncapped flues in newer subdivisions off 290. A sweep takes about an hour, and we’ll give you the inspection report the same day.
Dryer Vent Cleaning in Manor
A clogged dryer vent is a structure-fire risk, and Dryer Vent Cleaning in Manor is a service most chimney-only companies won’t touch. We do it because the stakes are the same: hot exhaust, flammable buildup, a route that has to stay clear. Manor homes with laundry rooms on interior walls often have long horizontal vent runs that trap lint faster than homeowners realize. We clean the full run and check the termination cover.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Manor
Chimney repair in Manor starts with what the house is made of. A 1970s brick ranch on a big lot almost certainly has a masonry chimney, and masonry chimneys in Central Texas don’t age gracefully. They crack at the crown, let water behind the brick, and rust out the damper. A 2018 build on a cut lot off FM 973 likely has a prefab system that was never capped, and the repair is simpler but no less urgent. Both are jobs we take on with the same standard: the right material for the repair, not whatever’s on the shelf at a hardware store. We stock and install Chimney Repair components from Copperfield, DuraFlex, and HeatShield.
Chimney Cap Installation
Signs you need it
You hear birds, smell nesting material, or see water dripping into the firebox after rain.
What it costs in Manor
A standard cap installation in Manor typically runs $180 to $340, depending on flue size and roof access.
How we do it
We measure the flue, select a stainless or copper cap that matches the system, and secure it with mechanical fasteners, not caulk.
Chimney Cap Replacement
Signs you need it
Your old cap is rusted through, blown off in a storm, or was a mesh-only screen that’s now clogged with creosote.
What it costs in Manor
Replacement in Manor runs $190 to $350, and the number shifts with ladder height and whether the old cap left damage behind.
How we do it
We remove the failed cap, check the flue lip for corrosion, and install a cap sized to your exact flue dimensions.
Chimney Liner Installation
Signs you need it
Your clay tile liner is cracked, spalling, or missing sections, and your chimney no longer vents safely.
What it costs in Manor
Liner work in Manor starts around $900 to $1,500, but a full reline with a DuraFlex stainless system typically runs $2,500 to $4,000.
How we do it
We size the liner to the appliance and flue, run the new DuraFlex system down the chase, and insulate around it as code requires.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling near the chimney or dampness in the attic against the chimney chase.
What it costs in Manor
Flashing repair in Manor typically costs $250 to $600, depending on whether it’s a patch or a full step-flashing replacement.
How we do it
We pull the old flashing, inspect the roof substrate, and install new flashing with proper counterflashing so water can’t work back under.
Chimney Crown Repair
Signs you need it
Your crown is cracked, crumbling, or was poured with regular mortar instead of a proper crown mix.
What it costs in Manor
Crown repair or rebuild in Manor runs $250 to $800, with full replacement on larger chimneys hitting the upper end.
How we do it
We remove the damaged crown material, form and pour a new crown with a proper overhang and drip edge, and seal it.
What Chimney Repair Costs in Manor
| Item | Typical range in Manor |
|---|---|
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $190 – $350 |
| Flashing repair | $250 – $600 |
| Crown repair or rebuild | $250 – $800 |
| Chimney liner installation | $900 – $4,000 |
How long does chimney repair take in Manor?
Most cap, flashing, and crown jobs are finished in one visit, usually half a day. A full liner installation may take a day, and we’ll let you know before any work starts. Call (877) 644-8036 to schedule an estimate.
Can you repair a prefab chimney in a Manor new-build?
Yes. We work on factory-built systems and commonly install caps, replace chase covers, and address rusted flue components in newer Manor subdivisions. Call (877) 644-8036 for a free estimate.
Brands We Service in Manor
We stock and install parts from Copperfield, DuraFlex, HeatShield, and Gelco, the same pro-grade lines certified chimney specialists spec on their own jobs. If a part isn’t on the truck, we source it fast. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Manor, TX
| Service | Typical range in Manor |
|---|---|
| Chimney sweep | $160 – $300 |
| Dryer vent cleaning | $100 – $220 |
| Chimney cap installation | $180 – $340 |
| Chimney cap replacement | $190 – $350 |
| Flashing repair | $250 – $600 |
| Crown repair or rebuild | $250 – $800 |
| Chimney liner installation | $900 – $4,000 |
| Chimney liner resurfacing (HeatShield) | $2,000 – $4,000 |
Roof pitch and chase height push Manor prices up more than anything else, especially on the older two-story ranch homes with steep gables. We give a flat written quote before the job starts, so there’s no surprise on the invoice.
Neighborhoods We Serve in Manor
We work across the 78653 ZIP and the full Manor area, from the older ranch lots off Blake-Manor Road to the newer subdivisions along the 290 corridor and FM 973. Most Manor homes are within a 30-minute response window for us.
- ShadowGlen
- Presidential Meadows
- Wildhorse Ranch
- Carillon
- Lagos
Service Area – Cities Near Manor
Our service area extends into the surrounding communities: Hornsby Bend, TX, Pflugerville, TX, Elgin, TX, and Windemere, TX. If you’re in one of these areas and need chimney repair, a sweep, or dryer vent work, we’ll come out.
Serving Manor, TX — Our Local Coverage Area
We’re based in the Manor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Manor
Most Manor appointments are scheduled within a few days, and we book by address, not by ZIP alone. Call (877) 644-8036 and we’ll give you the first available slot.
Some Manor subdivisions have rules about exterior work, but a repair that matches the existing system usually sails through. We can tell you what we’ve seen in your specific neighborhood.
Yes. We cover the full 78653 ZIP and surrounding areas, from the older ranch homes to every new-build subdivision in Manor.
If your chimney or dryer vent needs a real look from a company that repairs what it finds, call Resolute Chimney Sweep at (877) 644-8036 for a free estimate. We serve Manor and the surrounding area, and we’ll tell you straight what the job needs.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Manor Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Rana Khalil"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Scott Fletcher"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Beatriz Guzman