Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Leander, TX | Resolute Chimney Sweep
We provide independent Gelco chimney cleaning and service across Leander, including the 78641, 78645, and 78646 ZIP codes. What sets our work apart here is straightforward: most Leander homes have factory-built Gelco fireplaces that sit idle for months at a time, and we know exactly what Central Texas heat, humidity, and cedar pollen do to those units during the off-season. Call (877) 644-8036 for a free estimate. We service every Gelco model family found in Leander subdivisions, and we stock the prefab-specific parts these units need on the truck.
We’re an independent Gelco service provider, not a manufacturer affiliate or authorized dealer. That independence means we repair what’s actually wrong. If your Gelco firebox is structurally sound, we fix the component, not sell you a replacement you don’t need. See our broader Gelco sales & service page for the full scope of what we handle.
Why Leander Residents Choose Us for Gelco Service
We’ve serviced Gelco factory-built fireplaces across Leander’s newer subdivisions since they started appearing during the 2000s housing boom. That’s not a sales line. It means we’ve pulled hundreds of original builder caps off Gelco units in Crystal Falls, Bryson, and the Travisso-side growth, and we know the specific firebox, damper, and venting designs these units use before we even ring the doorbell.
Brent Calloway, who leads our team, grew up near the San Gabriel River corridor in Georgetown and has done chimney and vent work in this area for well over a decade. His approach carries over from hands-on building systems coursework at Temple College: methodical, specific, and honest about what a repair actually requires. The chimney doesn’t care how long it’s been since the last cleaning – but the creosote does. That’s the standard we bring to every Gelco job in Leander.
We use OEM Gelco parts when they’re available and reliable. For common wear items like dampers, caps, and gas-log components, we source quality aftermarket equivalents from professional chimney supply channels when OEM supply is slow or discontinued. No hardware-store substitutes, no shortcuts on the materials that keep your family safe.
Styles & brands we work with
Common Gelco Chimney Cleaning Problems We Solve in Leander
These are the five issues we see most often on Gelco units in Leander homes. Each one ties back to how this city’s housing stock and climate actually behave.
- Bird and wasp nests clogging the firebox and flue. During Leander’s long idle season, Gelco prefab units become prime real estate for wasps and birds. Homeowners usually discover the nest at the first winter lighting attempt, when smoke backs into the living room or the gas logs won’t stay lit.
- Seized damper and damper-handle mechanisms. On older Gelco prefab units that haven’t been operated in years, the damper linkage corrodes or binds. That’s especially common in homes from the early 2000s where the fireplace has seen minimal use since move-in.
- Sticky creosote glaze on firebox walls and flue. Central Texas humidity mixes with creosote from limited winter burning, and cedar pollen from the surrounding Hill Country adds to the buildup. The result is a hard-to-remove glaze that standard sweep brushes struggle with.
- Gas-log burners and pilots fouling after disuse. Months of Central Texas humidity take a toll on gas-log components. Burner ports corrode, pilots fail to light, and the first cool weekend in November turns into a service call.
- Original builder caps failing to vent properly. The caps and screens Gelco units shipped with in the 2000s often lack adequate screening or have deteriorated over time. We replace them with screened models sized for prefab flues, not masonry chimneys.
Gelco Service in Leander: What Local Conditions Mean for Your Equipment
Leander’s 183/183A corridor subdivisions like Crystal Falls and Bryson were built almost entirely with factory-built Gelco-style fireplaces rather than masonry. That’s the single most important fact about chimney work in this city, and it changes what parts we stock, what failures we expect, and how we approach every service call. In older Austin neighborhoods, a chimney technician might show up with mortar and brick. Here in Leander, we stock prefab-specific dampers, caps, and gas-log components on the truck. The homes along Ronald Reagan Boulevard and Bagdad Road in 78641 were mostly built between 2000 and 2020 with metal fireboxes and direct-vent or gas inserts. Those units need inspection and sweep work on a schedule their owners rarely follow, because the fireplace sits unused for nine months out of the year. The heat and humidity in this part of Williamson County mean creosote from a handful of winter fires mixes with moisture and nest debris into something sticky and stubborn. That’s the Leander Gelco reality in one sentence: gas-log units, seized dampers, and off-season nests.
A Crystal Falls homeowner called us because their Gelco gas-log fireplace hadn’t been touched since they bought the house new in 2012. We pulled the original builder cap and found a wasp nest packed into the flue and a seized damper. We cleared the nest, freed and lubricated the damper, and replaced the cap with a screened model. The gas logs lit on the first try afterward. That’s the typical Leander Gelco call, and we handle it end to end without sending the homeowner somewhere else for the repair.
Gelco Models & Products We Service in Leander
We service the full range of Gelco product lines found in Leander homes, including the G-series factory-built wood-burning fireplaces, Gelco gas log sets and vented gas fireplace inserts, and Gelco direct-vent gas fireplaces. Our approach to parts is straightforward: OEM Gelco components when they’re available and reliable, and quality aftermarket equivalents for common wear items like dampers, caps, and gas-log parts when OEM supply is slow or discontinued. We repair rather than replace whenever the firebox, venting, and frame are structurally sound. Most Leander Gelco calls are maintenance and component issues, not full replacements. Residential homeowners and property managers alike can call us with confidence, knowing the parts we install meet professional supply-channel standards, not retail substitutes. For a full overview of our brand expertise, visit our Gelco sales & service page.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Leander
Chimney cleaning for Gelco units in Leander typically costs between $125 and $250, depending on the model, accessibility, and how much creosote and nest debris has built up. A Level 2 inspection, which we recommend for any home where the fireplace hasn’t been looked at in three or more years, runs $150 to $300 when added to a sweep. Gas fireplace service for Gelco log sets and inserts generally falls between $100 and $300, depending on what’s fouled or worn. Cap installation or replacement costs $85 to $190, including the screened cap sized for your prefab flue. What drives our cost? The condition of the unit, access to the flue, and how long it’s been since the last service. Every estimate we give is free and specific to your Gelco model. Call (877) 644-8036 for an exact quote based on your fireplace and your Leander neighborhood.
Serving Leander, TX — Our Local Coverage Area
We’re based in the Leander area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Leander
At least once a year, even if you rarely use the fireplace. In Leander’s climate, the long idle season is exactly when nests form, moisture accumulates, and gas-log components degrade. Annual inspection catches those issues before the first winter lighting attempt. Call (877) 644-8036 to schedule your Gelco inspection before burning season.
The smell usually comes from moisture, dust, and sometimes animal debris that settled into the firebox and flue during the idle months. In Leander’s humid climate, that combination produces a musty odor that burns off slowly, and a smoky smell often means a partial blockage or a damper that isn’t opening fully. We clean the firebox, clear the flue, and verify the damper operates correctly so the unit burns clean. Call (877) 644-8036 and we’ll diagnose what’s actually causing the smell in your Gelco unit.
In most cases, you can replace just the damper. We repair rather than replace whenever the firebox, venting, and frame are structurally sound, and that includes damper replacement or refurbishment on Gelco prefab models. A full unit replacement is only necessary when the firebox or venting has failed. We’ll show you what we found and why, before recommending any work. Call (877) 644-8036 for a free assessment of your Gelco damper.
A screened cap sized for prefab flues, not masonry chimneys. Original builder caps on Gelco units often lack adequate screening, which is why wasps and birds get in. We install caps with proper spark-arresting mesh sized for your specific Gelco model, and we stock them on the truck for fast Leander turnaround. Call (877) 644-8036 to have a cap installed or your existing one inspected.
Yes. The housing stock changes as you move west toward Lake Travis in 78645, and we see more ranch-style homes with a mix of masonry and prefab units. Gelco fireplaces in those homes share the same failure modes as the 183/183A corridor models, plus a few extra years of wear. We service Leander’s 78645 ZIP code with the same parts and expertise we bring to Crystal Falls and Bryson. Call (877) 644-8036 and we’ll confirm your appointment time and what to expect.
Service Areas Near Leander
Our Gelco service area extends to the neighborhoods around Leander, including Leander service area, Georgetown, Round Rock, Brushy Creek, and Hutto. We also handle Gelco work in Gelco service in Windemere and Gelco service in Cedar Park, so if you’re just outside Leander proper, we’re still close by.
Book Your Gelco Service in Leander Today
We carry prefab-specific parts on the truck and know what Leander’s climate does to Gelco units. Call (877) 644-8036 now for a free estimate, and we’ll get your fireplace ready before the first cold weekend.
Written by Brent Calloway, Owner & Lead Technician at Resolute Chimney Sweep, serving Leander and the greater Williamson County area.