Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Gelco Chimney Cleaning in Cedar Park, TX | Resolute Chimney Sweep
We provide independent Gelco chimney cleaning and service across Cedar Park, covering both 78613 and 78630. What sets our Gelco work here apart is that we understand how Cedar Park’s HOA-governed subdivisions and hail-prone short stacks create specific failure patterns you won’t see in older Texas towns. If your Gelco fireplace needs a sweep, inspection, or cap work, call (877) 644-8036 for a straight answer and a free estimate.
Resolute Chimney Sweep has spent years servicing Gelco factory-built fireplaces in Cedar Park’s tract homes, patio homes, and master-planned communities. We’re an independent shop, not authorized or sponsored by Gelco, and that independence shapes how we diagnose every unit. Need a deeper look? See our Gelco sales & service overview, or keep reading for what Cedar Park conditions specifically do to these systems.
Why Cedar Park Residents Choose Us for Gelco Service
Most chimney companies treat a Gelco fireplace like any other box with a flue. We don’t. These builder-grade units have metal chases, factory terminations, and specific cap profiles that fail in predictable ways under Central Texas weather. Brent Calloway, our owner and lead technician, came up through the building systems and mechanical trades, and he applies the same methodical approach to every Gelco firebox and chase we open up in Cedar Park.
The difference shows up in the details. We carry OEM Gelco caps, dampers, and arrestors locally so Cedar Park homeowners aren’t waiting on a warehouse shipment. We know which aftermarket components hold up and which ones don’t. And because we also handle dryer vent cleaning and chimney repair, one call covers the sweep, the vent, and whatever the inspection turns up.
Our service area covers all of Cedar Park service area, from the 183A corridor to the neighborhoods off Lakeline and Ranch Trails.
Styles & brands we work with
Common Gelco Chimney Cleaning Problems We Solve in Cedar Park
- Hail-bent spark arrestors on builder-grade caps. Cedar Park’s dense newer subdivisions have short, exposed stacks, and the hailstorms that roll through in spring leave original Gelco arrestors bent flat or knocked loose. That opens the chase to rain and ice, which rusts dampers and firebox panels before you ever notice water in the firebox.
- Moisture intrusion through the long humid off-season. A Gelco fireplace that only fires during hard freezes sits unused for nine months of Cedar Park heat and humidity. Rust builds on caps, dampers, and firebox panels during that stretch, and we routinely find condensation damage in units that look fine from the room side.
- Creosote glazing from intermittent cold-snap use. Cedar Park’s freeze cycles create a specific pattern: short, intense burns followed by long idle periods. The resulting creosote layer is thin and glazed, not the thick fluffy stuff you see in constantly-used fireplaces, which means it hides blockages and still needs mechanical removal before it becomes a fire hazard.
- Chase and flashing leaks around short terminations. HOA rules in most Cedar Park communities prevent altering the original termination profile, so when flashing degrades or the chase top shifts, the leak has to be fixed within the factory configuration. That’s a repair most generalist sweeps won’t touch correctly.
- Builder-grade dampers rusted open or seized shut. The combination of hail-damaged caps and humid off-seasons means many Gelco dampers in Cedar Park never fully seal. That drafts conditioned air up the flue all summer and lets cold air pour down during freezes.
Gelco Service in Cedar Park: What Local Conditions Mean for Your Equipment
The thing that shapes Gelco chimney cleaning in Cedar Park more than anything else is the HOA constraint. Most subdivisions here were built in the last two decades with factory-built fireplaces and short metal terminations, and nearly every HOA restricts exterior roofline changes. That means when a Gelco spark arrestor gets bent by hail or a cap rusts out, the replacement has to match the original termination footprint exactly. In an older Texas town with a masonry chimney, you’d just swap in whatever cap fits and move on. In Cedar Park, the wrong cap silhouette is a covenant violation, and the fix gets expensive and adversarial fast.
We’ve worked enough of these to know the pattern: homes off Ranch Trails and Lakeline, built between 2005 and 2015, with original builder-grade Gelco terminations that have taken a decade of hail and sun. The arrestors bend, water tracks down the chase, the damper starts rusting, and the homeowner doesn’t find out until they see a drip in the firebox or smell must when the fireplace kicks on. The sweep itself is routine. The cap work is where local knowledge actually matters.
Gelco Models & Products We Service in Cedar Park
We service the full range of Gelco equipment common in Cedar Park housing: factory-built wood-burning fireplaces with metal chases, direct-vent gas fireplaces and inserts, spark arrestor and termination cap assemblies, and multi-flue or custom cap configurations on larger patio homes. For parts, we fit OEM Gelco caps, dampers, and arrestors whenever the original profile must be preserved, which covers most HOA situations in Cedar Park. Where an aftermarket component meets or exceeds factory spec and saves real money, we’ll recommend it and explain why. We stock the common Gelco terminations locally so a Cedar Park call doesn’t turn into a two-week parts wait.
See the difference
Before
After
Before
After
Before
AfterGelco Service Pricing in Cedar Park
A standard Gelco chimney sweep and Level 1 inspection in Cedar Park typically runs $180 to $250. A Level 2 inspection, which we recommend whenever hail damage is suspected or water intrusion has been reported, runs $300 to $500 and includes camera work in the flue. Cap or arrestor replacement adds $150 to $400 depending on the Gelco profile and whether we fit OEM or aftermarket. The big variable in Cedar Park is rust: if a hail-damaged cap has been left open for a season or two, the damper and firebox panels may need addressing too. Our estimates are free, and we’ll show you what we found before any repair is priced. Call (877) 644-8036 and we’ll come look.
Serving Cedar Park, TX — Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Gelco Chimney Cleaning in Cedar Park
Yes. We fit OEM Gelco caps and arrestors that preserve the original termination footprint, which satisfies virtually every Cedar Park HOA covenant we’ve encountered. The key is matching the exact factory profile, not just the flue diameter, and we keep the common Gelco terminations on hand for that reason. Call (877) 644-8036 with your model number and we’ll confirm what fits before scheduling.
Once a year, no matter how little you burn. Cedar Park’s freeze-cycle use creates a thin glazed creosote layer that doesn’t brush off as easily as the fluffy stuff, and the long humid off-season lets moisture do its own damage inside the chase. An annual sweep plus a quick cap and damper check is the cheapest insurance you’ll buy for that fireplace. Call (877) 644-8036 to schedule yours.
Almost certainly a bent or dislodged spark arrestor on the termination cap. Cedar Park’s short stacks take hail damage that older masonry chimneys shrug off, and once the arrestor is bent flat, rain tracks straight down the chase into the firebox. We’ll confirm it with a Level 2 inspection and replace the arrestor with an OEM-fit cap that keeps your HOA happy. Call (877) 644-8036 and we’ll get you on the schedule.
Yes. Direct-vent Gelco units need the same annual inspection of the venting, termination cap, and burner assembly that wood-burning fireplaces do, and we service both in Cedar Park. The failure modes differ, gas units are more sensitive to blocked terminations and rusted internal components, but the inspection discipline is the same.
If your Gelco fireplace is used occasionally and you’ve had no water intrusion or hail events near the cap, a Level 1 inspection during your annual sweep is standard. If you’ve seen water in the firebox, smelled must, or know the cap took hail damage, go straight to a Level 2 inspection, which includes camera work inside the flue and a close look at the chase and termination. Cedar Park’s hail history makes Level 2 calls more common here than most people expect. Call (877) 644-8036 and we’ll help you decide which one your situation calls for.
Service Areas Near Cedar Park
We serve Cedar Park proper plus the surrounding communities. That includes Gelco service in Wells Branch to the southeast, Gelco service in Pflugerville further east, and the homes in Georgetown, Brushy Creek, and Leander. If you’re in one of those areas and have a Gelco fireplace, the same team covers it.
Book Your Gelco Service in Cedar Park Today
If your Gelco fireplace hasn’t been swept this year, or if the spring hail left your cap looking questionable, call (877) 644-8036. We’ll schedule you, come out, and tell you exactly what we find, no upsell, no vague safety scare. The chimney doesn’t care how long it’s been since the last cleaning – but the creosote does.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Cedar Park and surrounding Central Texas communities.