Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Liberty Hill
A chimney sweep in Liberty Hill typically runs $189 – $320 for a standard cleaning and Level 1 inspection, and most jobs are done in under two hours. If your fireplace has never been serviced since the day you closed on the house, the more pressing problem is usually a builder warranty deadline, not a soot problem. We work 78642 heavily and book sweeps within the week during the fall and early winter rush. Call (877) 644-8036 and we’ll get you on the calendar before the first cold snap hits the Hill Country.
Liberty Hill homes are not like the older chimneys we see in Georgetown or Leander. Most flues here are less than fifteen years old, built around prefab metal systems rather than masonry. That changes what a Chimney Sweep actually does on a visit here: less old-style soot removal, far more capped-chimney checks, damper alignment, and documentation for builder warranties.
Why Resolute Chimney Sweep Is Liberty Hill’s Preferred Chimney Sweep Company
We spend a lot of time in Liberty Hill, and the calls follow a pattern. A homeowner notices smoke rolling back into the living room on the first fire of the season. Or a neighbor mentions their builder covered a cracked prefab cap under warranty, and now the homeowner wants their own chimney looked at before their one-year deadline passes. Resolute Chimney Sweep handles both of those conversations every week during burning season.
Homeowners here tell us the same thing: they didn’t know a new chimney needed anything. That’s not a knock on anyone. Production builders install hundreds of fireplaces across 78642, and commissioning a fireplace correctly takes time that most crews don’t get. We come in and do what was skipped at handoff, then document it properly.
Brent Calloway built Resolute around that follow-through. The brand means we see the repair through rather than writing a report and leaving you to find someone else. That matters when the discovery during a sweep is a misaligned damper on a two-year-old prefab fireplace and the builder wants a written inspection before honoring the claim.
Styles & brands we work with





Fireplace Cleaning in Liberty Hill
Fireplace Cleaning in Liberty Hill usually means a first-time service on a flue that has burned fewer than twenty fires, not the heavy creosote removal you’d expect in an older Texas town. The cleaning itself is straightforward: we remove the logs or gas assembly, brush the firebox, vacuum the soot, and check the damper, cap, and flue liner. What surprises most new homeowners is that the cleaning matters less than what we document while we’re in there. If a builder warranty is still active, that paperwork is often the only reason the repair gets covered.
First-Burn Documentation
Many Liberty Hill production builders write a first-burn clause into the fireplace warranty. The coverage expires if the fireplace is never operated before the one-year mark, and we’re not aware of a builder who sends a reminder. We do the inspection, run the fireplace through a cold start, and write our findings so the homeowner has a dated record. If something’s wrong, they can file before the deadline instead of after it.
Creosote and Soot Removal
Even a lightly used prefab fireplace collects glaze. Liberty Hill’s summers bake whatever creosote formed during winter fires, hardening it into a layer that won’t brush off with a cheap sweep. We remove it properly and tell you honestly whether the flue needs more than cleaning. A fireplace cleaned here in October will not need attention again until the next burning season, unless you burn more than a cord or two of wood.
Chimney Services in Liberty Hill
Chimney Services in Liberty Hill are built around prefabricated metal systems. Most houses in 78642 use factory-built chimneys with galvanized or stainless flues, chase tops, and prefab caps, not the brick stacks you see in older Georgetown neighborhoods. The work we do most often here is cap replacement, damper adjustment, flashing reseal, and Level 1 or Level 2 inspections. A standard service call runs $120 – $180, and a Level 2 inspection, which uses a camera to document the full flue interior, runs $250 – $400 depending on the system length and access.
Cap, Chase, and Damper Work
Newer builds settle. A chase cover that was tight at closing is loose two winters later, and the first sign is water staining on the ceiling below the chimney. We pull the cap, check the flue termination, reseat or replace what’s worn, and seal the flashing properly. Most of this work uses components from Copperfield or Olympia Chimney, which are the same brands the prefab manufacturers specify.

Level 2 Camera Inspection
When a Liberty Hill homeowner tells us the fireplace smokes into the room on cold starts, we do not guess. A camera inspection shows whether the flue is correctly sized for the appliance, whether the damper is actually opening all the way, and whether any construction debris is obstructing the passage. That’s the difference between finding the problem and just cleaning around it.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Liberty Hill
We stock and install components from DuraFlex, HeatShield, and Copperfield because those are the product lines the prefab chimney manufacturers require for repair and relining work. A Liberty Hill homeowner with a DuraFlex liner already installed does not need a different company to come in and guess. We carry the matching components locally and can order exact-fit parts without waiting two weeks on a hardware-store substitute. Our Chimney Sweep team works with these systems daily, so the repair matches the original spec instead of improvising around it.
See the difference
Before
After
Before
After
Before
AfterCommon Chimney Sweep Problems We See in Liberty Hill Homes
- Builder warranties about to lapse. We routinely document brand-new, never-fired chimneys in 78642 because the one-year first-burn clause is real and it voids quietly. Homeowners call us at month eleven, and we get the inspection done with a written record the builder can’t dismiss.
- Cold-start smoke rollout. A fireplace that smokes only for the first five minutes of a fire often has a damper that is slightly misaligned from installation. The builder crew never caught it because nobody ever lit a fire during the walkthrough.
- Loose prefab caps and chasing. Two or three Hill Country freeze-thaw cycles are enough to loosen the cap on a prefab chimney. Water gets in, rust follows, and the homeowner notices the stain months before they call us.
- Hard glazed creosote from idle summers. Central Texas heat bakes whatever creosote formed during a few winter fires into a hard layer that a basic brush won’t remove. We see it a lot in Liberty Hill where fireplaces sit unused from March through November.
Pricing for Chimney Sweep in Liberty Hill, TX
A standard chimney sweep and Level 1 inspection in Liberty Hill runs $189 – $320. That covers the brushing, vacuuming, and a written condition report. If you add a camera inspection, expect $250 – $400 total. Cap replacement or damper repair adds $150 – $350 depending on the part and access. What drives the price here more than anything is whether the fireplace has ever been serviced: a five-year-old flue that has never been cleaned takes longer than one we’ve seen before. Our estimates are free. Call (877) 644-8036, tell us the neighborhood and the fireplace type, and we’ll give you a firm number before we book.
We Also Serve Cities Near Liberty Hill
Our service area covers the 78642 corridor and the surrounding towns. If you’re in Chimney Sweep in Liberty Hill or one of the nearby communities, we’ve got boots on the ground regularly. We work in Leander, Serenada, Cedar Park, and Georgetown, and we schedule routes so a call from any of these areas gets on the calendar fast without paying an extra trip charge.
Serving Liberty Hill, TX — Our Local Coverage Area
We’re based in the Liberty Hill area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Liberty Hill
A three-year-old chimney needs an inspection because the builder almost certainly never commissioned it, which means no one has ever verified that the damper opens fully, the cap is tight, and the flue drafts correctly. In Liberty Hill, we find loose caps and misaligned dampers on homes of exactly that age, and most were caught only because the homeowner decided to check before the warranty expired. Call (877) 644-8036 and we’ll document the condition while you still have coverage.
A first-burn clause is a builder warranty term that requires you to operate the fireplace at least once within the first year, or the warranty on the fireplace and chimney voids. Many Liberty Hill production builders use this clause, and since nobody tells the homeowner, coverage lapses silently. We document the first fire and the flue condition so you have a dated record. If something’s wrong, you file while the warranty still applies.
No, it is not normal, but it is common in Liberty Hill new builds where the fireplace was installed by a production crew and never commissioned. The usual cause is a damper that doesn’t open completely or a flue sized wrong for the firebox. We diagnose it with a Level 2 camera inspection and fix it properly. A smoking fireplace is a draft problem, not a quirk you live with.
If you use the fireplace fewer than ten times a year, an annual inspection with a light cleaning is still the right cadence. Liberty Hill’s long idle seasons bake whatever creosote formed into a hard glaze, and that layer needs to come off before the next burn season. We recommend a Level 1 inspection each fall, with a full sweep every other year for light-use homes. Call (877) 644-8036 and we’ll set the schedule based on how you actually use the fireplace.
Yes. We stock and install DuraFlex liner systems, Olympia Chimney components, and other professional-grade brands specified by prefab fireplace manufacturers. That means if your new-build chimney needs a cap, a liner section, or a damper, we source the exact match rather than an off-brand substitute that voids the manufacturer’s own coverage. One call covers the sweep, the vent, and the repair.
On a 2021 build in the Santa Rita Ranch community, we inspected a prefab metal fireplace that had never been burned. The homeowner was worried because the builder’s one-year warranty was about to expire and they’d never even lit a fire. We ran a Level 1 inspection, found the damper was misaligned and the prefab chimney cap was loose, and documented everything so the homeowner could file a warranty claim before the deadline. That’s what we do all over Liberty Hill, and it’s why we keep our schedule open for last-minute warranty inspections during the fall.
If your fireplace is brand new or just new to you, now is the time to get it documented. Call (877) 644-8036 for a free estimate, and we’ll send a sweep who knows 78642 and the systems builders put in. Brent Calloway and the team at Resolute Chimney Sweep serve Liberty Hill year-round, and we’ll tell you plainly whether your chimney needs work now or can wait. No scare tactics, no upselling, just the condition of your flue and what it means.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Liberty Hill and the surrounding Hill Country.