Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Austin
A chimney sweep in Austin, TX typically costs $189 to $329 for a standard cleaning with a Level 1 inspection, depending on fireplace type and what we find. We book within a week in most Austin zip codes, not months out. If you’re reading this in September or October, call (877) 644-8036 now: the first cold snap in 78704 and 78702 always brings a rush of smoky backdrafts from blocked flues that sat unused through the long, mild off-season.
Resolute Chimney Sweep covers Austin from our Georgetown base, with crews familiar in Travis Heights, Hyde Park, Clarksville, and the hillside homes along 2222 and 360. We work on pre-war bungalows every week, so we know what a single-wythe brick firebox looks like before we even set up the drop cloths. That local experience changes what we catch and what we recommend.
Why Resolute Chimney Sweep Is Austin’s Preferred Chimney Sweep Company
Austin homeowners call us because we don’t sell repairs on a hunch. Every flue we service gets camera verification before we recommend anything beyond a sweep. When we find cracked mortar, a deteriorated liner, or animal debris, we show you the footage on our tablet before discussing options. That standard matters more in Austin than almost anywhere: the pre-war housing stock in 78702, 78703, and 78704 holds unlined and clay-tile fireboxes that fail inspection routinely, and the industry is full of companies that quote liner replacements without ever putting a camera up the pipe.
Reviews from Austin customers return consistently to one thing: we explain what we’re seeing. Whether it’s a squirrel nest pulled from a Hyde Park chimney or spalled crown mortar on a Clarksville bungalow, homeowners get the same answer every time: “Here’s the footage. Here’s what it means. Here’s what we’d do.” Brent Calloway built Resolute on that standard. The name means we see a job through, from discovery during the sweep to the repair itself. We’re a Chimney Sweep company that also fixes what we find, so you’re not handing the findings to another contractor and starting over.
Styles & brands we work with





Fireplace Cleaning in Austin
Fireplace Cleaning in Austin means more than running a brush through the flue. It’s removing hardened creosote, clearing animal nesting, cleaning the smoke chamber and damper assembly, and scanning the firebox for the kinds of failures common to our older housing stock. A standard fireplace cleaning with Level 1 inspection in Austin runs $189 to $279. If the flue has significant creosote build-up or animal debris, expect $279 to $329 for the additional time and material. For comparison, a dryer vent cleaning in the Austin metro is $89 to $169 depending on run length and access.
Sweep and Smoke Chamber Work
Creosote in Austin hardens differently than in colder climates. With only a handful of burns per season, deposits form in thin, glaze-like layers instead of burning off through regular use. We remove it from the flue walls, smoke shelf, and damper assembly with rotary and hand tools matched to the liner material.
Seasonal Timing
Most Austin homeowners book in October and November, but the smart move is September. Dormant flues collect squirrel nesting and oak debris over spring and summer. Cleaning before the first burn means you light with a clear, inspected flue rather than discovering a backdraft at the worst moment.
Chimney Services in Austin
Chimney Services in Austin covers the spectrum, from annual sweeps to structural repair and liner resurfacing. A Level 2 inspection, the more detailed camera scan, runs $225 to $375 and is what we recommend whenever a home transfers ownership, a fireplace hasn’t been used in years, or a Level 1 turns up signs of water entry, spalling, or animal activity. Repairs are quoted separately after we show you the camera findings; no recommendation comes without visible evidence.
Repair and Relining
When a camera documents cracked flue tiles or deteriorated masonry, we quote the right repair or a properly sized DuraFlex stainless liner for the fireplace’s BTU output. Austin’s older chimneys frequently lack the clearance or lining modern appliances require, and a liner solves that to code rather than forcing a rebuild.

HeatShield Resurfacing
For clay tile flues with minor cracks or gaps, HeatShield resurfacing restores the interior without demolition. It’s a product most sweep crews don’t stock or know how to apply. We do, and it has saved Austin homeowners thousands compared to a full reline when the underlying masonry was still sound.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Austin
We stock and install from the pro lines, not the hardware store shelf. DuraFlex stainless liners for relining work, HeatShield for ceramic resurfacing, Copperfield components for caps and dampers. When a Travis Heights bungalow needs a new chimney cap or a Clarksville home needs a damper replaced, we don’t order a generic part and hope it fits. Austin’s older chimneys often have non-standard dimensions, so having the right Copperfield or Gelco component on the truck means the job gets finished in one visit, not two.
Common Chimney Sweep Problems We See in Austin Homes
- Blocked flues from wildlife nesting. The live oak canopy across 78702, 78703, and 78704 supports a robust squirrel and raccoon population. Uncapped flues collect nests, leaves, and acorn caches over the long dormant season, and the first fire of fall becomes a smoky backdraft instead of a clean burn.
- Deteriorated mortar in single-wythe fireboxes. Pre-war Craftsman bungalows and 1920s-40s pier-and-beam homes in Hyde Park and Travis Heights often have original unlined brick fireboxes. Mortar spalls with age and Austin’s summer humidity, opening gaps that pass a quick visual check but fail the camera.
- Hardened creosote from irregular use. Austin’s mild heating season means fireplaces sit unused for months. Creosote deposited in thin layers hardens rather than burning off, making it stubborn to remove and more likely to ignite when a hot fire finally hits it.
- Rusted dampers and damaged crowns. Central Texas heat and humidity accelerate rust on exposed dampers and caps while spalling chimney crowns. A fireplace that looked fine in spring can leak or smoke by fall even if it was swept the season before.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Austin, TX
A standard sweep with Level 1 inspection in Austin runs $189 to $279. Expect $279 to $329 when we’re dealing with heavy creosote, animal debris, or an unlined flue that needs extra care. Level 2 camera inspections run $225 to $375. Dryer vent cleaning is $89 to $169. Repairs are quoted after we show you the footage; nothing is recommended until you’ve seen what we’re seeing. Estimates are free. Call (877) 644-8036 and we’ll give you an honest range for your specific chimney where Austin is our regular service area, with no obligation to book.
We Also Serve Cities Near Austin
Resolute Chimney Sweep covers Rollingwood, Lost Creek, West Lake Hills, and Barton Creek alongside our Chimney Sweep in Austin service area. Those hillside and estate homes often have larger flues, multiple fireplaces, and older masonry, so the same camera-first standard applies across the board. If you’re in West Lake Hills or Rollingwood, the drive time is short and the inspection standard is identical.
Serving Austin, TX — Our Local Coverage Area
We’re based in the Austin area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Austin
Annual inspection matters more with light use than heavy use in Austin. Dormant flues collect nesting, leaves, and creosote that hardens instead of burning off. The chimneys with the worst blockages we find are usually the ones used least, because wildlife has had months to move in undetected. An annual Level 1 inspection catches that before the first burn, not after the backdraft. Call (877) 644-8036 to get on the schedule before cold weather.
You know by demanding camera evidence. Our rule at Resolute is absolute: no liner recommendation, no HeatShield quote, no repair estimate without footage you can see yourself. If a company tells you the liner is cracked and you haven’t watched the camera feed with your own eyes, get a second opinion. We show every customer the exact compromised section before we discuss fixes. Most Austin homeowners who see cracked flue tiles on our tablet understand the recommendation immediately; those are the quotes that hold up. Call (877) 644-8036 for a sweep and inspection that comes with proof.
It’s usually a blocked or restricted flue, not a draft issue. In Austin’s older neighborhoods, the block is typically a squirrel or raccoon nest built during the off-season. Live oak debris and acorn caches combine with hardened creosote to create a partial obstruction that pushes smoke back into the room. A camera inspection confirms what’s in there and a sweep clears it. If you’re smelling smoke, stop burning and schedule an inspection, because backdraft pulls carbon monoxide into the living space. Call (877) 644-8036.
Your options are a properly sized and insulated flue liner, either DuraFlex stainless steel or a HeatShield resurfacing system, depending on the condition of the existing masonry. Unlined fireboxes in Travis Heights, Hyde Park, and Clarksville bungalows fail inspection routinely because the missing liner allows heat and gases to reach combustible framing. The right fix is determined by camera findings, BTU output, and the chimney’s dimensions. We show you the footage and then quote the right system. Call (877) 644-8036 for a Level 2 inspection on an unlined fireplace.
Yes, and it’s one of the cheapest preventive measures you can take in Austin. An open, uncapped flue is an invitation for the live oak squirrel population around 78702, 78704, and 78703 to move in during the long stretch when many fireplaces aren’t used. A properly fitted cap, Copperfield is what we stock for most older Austin chimneys, keeps animals and rain out while allowing proper venting. We install caps as part of the visit if the existing one is missing or rusted. Call (877) 644-8036 and ask about adding a cap when we’re out for the sweep.
Schedule Your Austin Chimney Sweep Today
Austin’s pre-war fireboxes, dormancy-driven creosote hardening, and wildlife load mean your chimney needs a professional who looks before recommending. Resolute Chimney Sweep serves all of Austin, from the pier-and-beam bungalows of Travis Heights to the hillside homes off 2222. Every quote is backed by camera footage you can see. Call (877) 644-8036 for a free estimate, or to book your sweep before the first cold snap fills your living room with smoke.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Austin and surrounding communities.