Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
DuraFlex Chimney Cleaning in Windemere, TX | Resolute Chimney Sweep
We provide independent DuraFlex chimney cleaning and service throughout Windemere, TX, covering everything from the top cap to the appliance connector. The thing that makes our DuraFlex work here different is that we understand how lightly used Windemere fireplaces fail, because most sit empty for eight or nine months at a stretch. When you call Resolute Chimney Sweep at (877) 644-8036, you get a technician who knows exactly what to look for in a DuraFlex liner system that has been doing nothing but collecting dust, insects, and creosote since last winter.
We’re not manufacturer-affiliated, never have been. That independence means we can tell you the truth about what needs replacing and what’s still got years left in it. Our crews service DuraFlex venting systems across all of Windemere’s 78764 zip code, handling everything from simple sweeps to full liner inspections and cap replacements. If your fireplace has been sitting idle and you’re pretty sure something is living in it, call us before you light the first fire of the season.
Why Windemere Residents Choose Us for DuraFlex Service
DuraFlex liners and caps fail in predictable ways, but those failures look different in DuraFlex in Jollyville or Windemere than they do in, say, Georgetown or Round Rock. Our owner, Brent Calloway, grew up near the San Gabriel River corridor and has spent years learning which venting problems repeat themselves in this part of Central Texas. He’s the one who taught our techs that a Windemere fireplace that’s been unused since February will usually have something in it by October. Birds, wasps, dust, cedar pollen, the occasional unlucky squirrel. None of it belongs in your flue.
We carry OEM DuraFlex sales & service parts because they mate correctly with the liner kit you already have. When a top cap needs replacing or a top plate works loose after a hard freeze, using the wrong component just creates another failure point. That’s why we stock the DuraFlex parts Windemere homeowners need most, and when OEM isn’t practical for a clamp or fastener, we tell you so and use a quality equivalent instead. No guesswork, no hardware-store substitutes.
Styles & brands we work with
Common DuraFlex Chimney Cleaning Problems We Solve in Windemere
- Liner pulling loose at the top plate or appliance connector. Central Texas hard freezes followed by 90-degree heat cause masonry and metal to expand and contract at different rates. After several seasons, DuraFlex flexible liners can work themselves loose where they connect. We re-secure or replace the connector components and make sure the liner is properly supported. This is a Windemere pattern, especially on ranch homes with exposed chase tops.
- Top caps and multi-flue caps that have shifted or corroded. Our sun is brutal on metal. DuraFlex round and square top caps on Windemere rooftops bolt to masonry that moves seasonally, and after a decade or so the cap can lift slightly. A shifted cap means rain gets in, birds get in, wasps get in. We fit new OEM DuraFlex caps with proper mechanical fasteners, not caulk.
- Soot and cedar pollen packed into liner seams and joints. Windemere sits in cedar country. During the long months a fireplace sits unused, fine dust and pollen settle into every seam of a flexible liner. The first fire bakes it hard, which is why a light sweep won’t get the flue back to clean. Our creosote removal process gets the packed material out without damaging the liner walls. We also check for any seam separation while we’re in there.
- Damper and appliance-connector hardware seized or rusted from moisture intrusion. When a masonry crack lets water into a Windemere chimney, the first thing to suffer is usually the damper assembly on a DuraFlex insert venting system. Rusted dampers either won’t close or won’t open, and both are a problem. We inspect the full path from firebox to cap so the problem gets fixed at its source, not just lubricated and left.
- Bird nests, wasp nests, and mud dauber tubes inside the flue. If you only burn a few fires each year, your chimney is effectively vacant real estate for most of it. Our techs routinely find mud dauber nests plugging Windemere flues that were perfectly clean the spring before. See something flying in or out around your cap? Have us look before you light.
DuraFlex Service in Windemere: What Local Conditions Mean for Your Equipment
Here’s the thing about Windemere’s mix of mid-century ranch homes and new custom builds that most online chimney content never gets into. In the older ranch houses along the 78764 side, you typically have a free-standing masonry fireplace built with clay tile liners that are now sixty or seventy years old. Those clay tiles crack with age and with the freeze-thaw cycling Central Texas delivers every winter. In the newer custom builds, you have prefab metal fireplaces and gas inserts that ship with factory venting, often a DuraFlex liner kit. A homeowner in the first house needs to know whether a DuraFlex repair in Anderson Mill or a liner can even go inside that cracked clay tile. A homeowner in the second needs to know whether their factory venting is still doing its job after five or six years of expansion, contraction, and intermittent use. Both of them live in the same neighborhood, and the answer isn’t the same for either one. We handle both, which is why we rarely use a template for Windemere jobs. We look at the actual chimney, the actual liner, the actual cap, and then we tell you what’s actually going on.
On a ranch home off the 78764 side of Windemere, our tech pulled the top cap on a DuraFlex service in Pflugerville or a flexible liner kit and found a mud dauber nest plugging the flue plus soot baked onto the liner seams from a fireplace used maybe three times last winter. We cleared the nest, ran a proper Level 2 inspection of the liner and top plate, and refit a new DuraFlex top cap with a tight seal. The homeowner’s first fire that fall drafted cleanly for the first time in years. That job had three separate issues stacked on top of each other, and none of them showed up until the cap came off.
DuraFlex Models & Products We Service in Windemere
We service the full DuraFlex family that shows up in Windemere homes. That includes the stainless steel flexible chimney liner in 6-inch and 8-inch single-wall kits, the insulated flexible liner kits used for masonry fireplace relining, and the round and square top caps and multi-flue caps that most Windemere installations use. We also handle the supporting hardware: top plates, appliance connectors, and damper assemblies.
For parts, our rule is simple. When OEM DuraFlex caps, top plates, or connector components are available, we use them, because they were designed to fit the liner kit you have. For clamps and fasteners where DuraFlex doesn’t supply a practical option, we use quality aftermarket equivalents and we say so on the invoice. On older liner kits we’ll compare relining cost against repair honestly. A sound liner gets a cap and connector refresh. A corroded or detached one gets replaced. No upselling, no vague warnings.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Service Pricing in Windemere
Most DuraFlex chimney cleanings in Windemere run between $180 and $340, depending on liner length, how heavily the flue is packed, and whether we’re also replacing a cap or connector component. If you need a new DuraFlex top cap, that typically adds another $75 to $150 in parts and labor. A full Level 2 inspection runs on top of the sweep, and a liner replacement for a typical Windemere ranch flue usually starts around $1,200 to $1,800 all-in, depending on liner diameter and how much of the old system has to be pulled out.
What drives the price here more than anything is the condition of what’s already installed. A flue that’s been sitting packed with cedar dust and soot for nine months takes longer to clean than one used every week. When we quote you a price, it’s a flat number agreed before we start. Call (877) 644-8036 for an exact quote. Estimates are free, and we’ll tell you up front if this is a clean-and-go or something more involved.
Serving Windemere, TX — Our Local Coverage Area
We’re based in the Windemere area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – DuraFlex Chimney Cleaning in Windemere
No. In nearly all cases we can clean a DuraFlex flexible liner in place using the right brushes and rods for the liner diameter. Pulling a liner is only necessary when we’re replacing it or when the flue is so obstructed that access is impossible from the top or the firebox. We’ll know which situation you’re in after the first look.
That musty smell usually means moisture is getting into the flue through a shifted top cap or a cracked top plate, then sitting in the soot and creosote deposits inside the liner. In Windemere’s humid summers, that damp soot smells exactly like a musty basement. The fix is usually a cap replacement, a top plate re-seal, and a thorough cleaning of the liner interior. Call (877) 644-8036 and we’ll trace where the water is getting in.
Not usually in Windemere, and here’s why. A Level 1 inspection is a visual check of the accessible surfaces. A Level 2 inspection uses specialized cameras and covers the full interior of the liner, the top plate condition, and the connector points, which is where DuraFlex systems in this area tend to fail. If your chimney has been unused for months or you haven’t had a proper inspection in years, we recommend the Level 2 as the baseline.
In most cases we can replace just the top cap without touching the liner. A rusted or shifted cap on an otherwise sound DuraFlex liner is a straightforward parts job. The time to consider a full liner kit replacement is when the liner itself has corroded, detached, or separated at a seam. We’ll show you the camera footage so you can see exactly which condition applies before you spend a dollar on parts.
Yes, and this is one of the most common repairs we do in Windemere’s older ranch homes. A cracked or deteriorated clay tile liner can be relined with a flexible stainless DuraFlex liner, which restores a continuous, code-compliant venting path without tearing apart the masonry. We’ll inspect the existing tile, measure the flue, and tell you whether a 6-inch or 8-inch insulated kit is the right fit. Call (877) 644-8036 for an on-site evaluation and free estimate.
Service Areas Near Windemere
We run DuraFlex chimney cleaning and repair throughout the 78764 zip and the surrounding communities. If you’re in Georgetown, Serenada, Round Rock, Brushy Creek, Hutto, or Leander, we do the same work there we do in Windemere. For neighbors in Windemere service area, we’re local. For folks looking for DuraFlex service in Cedar Park or DuraFlex service in Wells Branch, same crews, same standards, same pricing model.
Book Your DuraFlex Service in Windemere Today
If your Windemere chimney has been sitting idle since last season, don’t wait until the first cold weekend to find out what moved in. Call Resolute Chimney Sweep at (877) 644-8036 for a free estimate. We’ll inspect your DuraFlex system, clean what needs cleaning, and tell you plainly what’s next.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Windemere and the surrounding Central Texas communities.