Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Why Georgetown Homeowners Choose DuraFlex Chimney Cleaning
We provide independent DuraFlex in Georgetown chimney cleaning and repair service for homes with flexible stainless liners and prefab fireplace systems. As an independent sweep, we assess DuraFlex systems on their actual condition and the manufacturer’s installation specs rather than selling a brand narrative. What sets our DuraFlex work apart in Georgetown is that we know how these corrugated-wall liners actually fail in Central Texas heat, clay soil, and freeze-thaw cycles, and we clean them with brushes and methods that don’t tear up the corrugations. Call (877) 644-8036 for a free estimate on DuraFlex service in Georgetown.
DuraFlex makes flexible stainless chimney liners and prefab chimney components used in thousands of Georgetown homes, from the Victorian-era masonry chimneys downtown to the 1990s prefab fireplaces in the subdivisions east and west of I-35. The product is solid. But like any flexible liner, it has specific maintenance realities. Corrugated walls grab creosote. Top plates and caps corrode at the roof line. Seams can separate if someone runs the wrong brush through them. This page covers what Georgetown DuraFlex owners actually need to know, based on what we see in the field.
Key Takeaways:
- We’re an independent DuraFlex service provider in Georgetown, not an authorized dealer or manufacturer affiliate.
- We clean DuraFlex SW, DuraFlex Pro, and DuraFlex prefab chimney systems with rotary brushes sized for corrugated liners.
- We stock DuraFlex factory top plates, caps, and common liner components locally for faster turnaround.
- Creosote glazing and top-plate corrosion are the two most common DuraFlex failures in Georgetown’s climate.
- We repair a sound liner in place; we replace a crushed, rusted-through, or separated liner rather than patching it.
Why Trust Resolute Chimney Sweep for Your DuraFlex Chimney Cleaning?
Brent Calloway, our owner and lead technician, has been doing chimney and vent work in the Georgetown area for well over a decade. He grew up near the San Gabriel River corridor, picked up his technical foundation in building systems and mechanical trades at Temple College, and still applies the same methodical approach to every flue liner and dryer vent he inspects. Brent is the technician who will tell you exactly what he found and why it matters, no upsell and no vague safety scare.
Our technicians know DuraFlex liners the way a mechanic knows a specific engine family. We know what a DuraFlex SW single-wall liner looks like after five years of burning cedar and oak in a Williamson County fireplace. We know what a DuraFlex Pro double-wall insulated liner looks like after a hard freeze cracks the crown and lets water run down the flue. We know what a DuraFlex prefab chimney section looks like when a chase cover has rusted through and debris has been collecting for a decade. That familiarity means we clean to the liner’s actual condition, not a one-size-fits-all broom job. The chimney doesn’t care how long it’s been since the last cleaning, but the creosote does.
We’re not affiliated with DuraFlex and we’re not authorized by the manufacturer. We say that plainly because homeowners deserve to know who they’re hiring. What we are is an independent Georgetown chimney company that has swept, inspected, and repaired enough DuraFlex systems to tell you when your liner needs a sweep, when it needs a top plate or cap, and when it needs to come out.
Styles & brands we work with





Common DuraFlex Chimney Cleaning Problems We Fix in Georgetown
Here are the five most common DuraFlex issues we see across Georgetown, from the original brick chimneys downtown to the prefab units in the newer subdivisions.
- Creosote glazing packed into the liner corrugations. DuraFlex SW and Pro liners have corrugated stainless walls, and those ridges are creosote magnets. Stage-3 glazed creosote builds up inside the corrugations, hides hairline cracks, and restricts draft. Georgetown homeowners who burn a lot of cedar or pine see this faster than anyone, because cedar produces heavy, sticky creosote.
- Seam and joint separation from the wrong brush. Flexible liners have welded seams and joints. Run a stiff wire brush or the wrong size rotary whip through them repeatedly and those seams can pull apart. A separated seam lets hot gases reach the surrounding masonry two feet from the firebox, and that is a chimney fire waiting to happen. We see it often in Georgetown homes where a previous sweep used a generic masonry brush on a flexible liner.
- Rusted top plates and caps from water intrusion. The top plate, cap, chases, and flashing at the roof line take the brunt of Georgetown’s weather. Hot summers bake the sealant. Hard freezes crack it. Rain and spring pollen coat the metal and sit there. Within a few years, the top plate rusts through and water runs down the flue, pitting and rusting the liner from the top down.
- Sagging or crushed liner sections from poor support. A flexible liner is only as good as its support. When an installer skips proper standoffs or offsets a liner around a smoke shelf without support, the liner can sag or crush under its own weight. That creates a bottleneck, reduces draft, and pushes smoke back into the firebox. We see this most often in older Georgetown chimneys with unusual offsets that were relined years ago.
- Animal nests and debris in prefab chimney sections. DuraFlex prefab fireplace chimney sections and termination caps collect leaves, pollen, and animal nests, especially in Georgetown’s east and west side subdivisions where homes sit near greenbelts and creek lines. A squirrel or bird nest above a prefab firebox is a serious carbon monoxide and fire hazard, and it has to come out before the first fire of the season.
DuraFlex Parts & Our Repair-vs-Replace Approach
Where DuraFlex factory top plates, caps, and liner components are available, we use them. Factory parts match the original installation specs and keep any remaining manufacturer warranty intact where that applies. When factory parts are back-ordered or discontinued, which happens more often than manufacturers like to admit, we use quality aftermarket stainless caps and flashing that meet or exceed the original spec. We never use galvanized hardware-store substitutes on a stainless liner system.
Our repair-vs-replace rule is simple, and we apply it honestly. If a DuraFlex liner is structurally sound, clean, and properly supported, we repair the component that failed, usually a top plate, cap, flashing, or chase cover. If the liner is crushed, rusted through, or separated at a seam, we replace it. We don’t patch an unsafe liner, and we don’t tell a homeowner to replace a sound liner just to sell a job. We show you the camera footage and let you see what we see. If you need Serenada DuraFlex service or have a question in Georgetown, call (877) 644-8036 and we’ll tell you straight what you’re dealing with.
Our DuraFlex Service Process – Step by Step
- 1
Diagnosis and camera inspection. We start with a Level 2 camera inspection of the entire DuraFlex system, liner interior, seams, top plate, cap, and flashing. The camera doesn’t lie, and neither do we. You’ll see the creosote, the rust, the separation, or the clean liner before we touch a brush.
- 2
Rotary creosote removal. For DuraFlex SW, DuraFlex Pro, and flexible relining kits, we use rotary whips and brushes sized for corrugated stainless liners. This removes glazed creosote from the ridges without gouging the liner walls or pulling at the seams.
- 3
Component replacement. If the top plate, cap, flashing, or chase cover needs replacement, we install the correct DuraFlex factory part or a quality stainless aftermarket equivalent, sealed and fastened to hold up to Georgetown’s weather.
- 4
Draft and pressure test. After the sweep and any component work, we test the draft with a smoke pencil or manometer to confirm the flue is drawing properly and no smoke is spilling into the firebox.
- 5
Warranty and documentation. We document the inspected condition, the work done, and the parts used. If we’ve repaired a warrantable component, we note that for your records so you know exactly what was serviced and when.
See the difference
Before
After
Before
After
Before
AfterDuraFlex Products We Service & Install in Georgetown
Our Georgetown techs service the full DuraFlex range we encounter in Williamson County homes. That includes:
- DuraFlex SW (single-wall flexible stainless liner) in masonry chimneys, the most common relining system in older Georgetown homes.
- DuraFlex Pro (double-wall insulated flexible liner) for high-efficiency gas and wood appliances where clearance and insulation matter.
- DuraFlex prefab fireplace chimney sections and termination caps in the 1980s-2000s subdivisions east and west of downtown Georgetown.
- DuraFlex flexible relining kits for masonry chimneys, including top plates, connectors, and caps.
We keep common DuraFlex relining components, top plates, and caps in local stock so a repair doesn’t stall for two weeks waiting on a distributor.
We Also Service These Brands
Resolute Chimney Sweep isn’t a single-brand shop. We work across the professional chimney product lines, not just DuraFlex. That includes HeatShield resurfacing products for chimney liner restoration and Gelco components for chase covers and caps, along with components from Olympia Chimney, Famco, and Copperfield. Multi-brand capability means we install the right component for the system and the failure, not whatever happens to be in the truck.
FAQs – DuraFlex Chimney Cleaning Service in Georgetown
Yes, a DuraFlex flexible stainless liner can be swept safely when the right tool is used. We use rotary whips and brushes sized specifically for corrugated stainless liners, not the stiff wire brushes meant for masonry flues. That’s the difference between a clean liner and a liner with torn seams. If your Georgetown liner has been swept before, call (877) 644-8036 and we’ll inspect the condition before running anything through it.
The signs are specific. Smoke rolling back into the room, a persistent burning smell even when the fireplace is cold, rust streaks on the exterior chimney, water in the firebox after rain, or a glowing spot on the chimney wall are all failure indicators. A camera inspection confirms exactly what’s happening inside the liner. If you’re seeing any of these in Georgetown, call us before your next fire, not after.
The corrugated walls on a DuraFlex flexible liner create more surface area and more ridges than a smooth clay tile flue, and creosote builds in those ridges. Burning soft, resinous woods like cedar, which Georgetown homeowners use heavily, accelerates the buildup into glazed stage-3 creosote. If you burn cedar or pine regularly, you may need sweeping twice a year instead of once. Call (877) 644-8036 and we’ll tell you what your burn pattern means for your liner.
Yes, in most cases a rusted top plate, damaged cap, or failed flashing can be replaced independently without touching the liner itself. We replace the top component, inspect the top few feet of liner for water damage, and reseal the entire top assembly. It’s a much smaller job than a full reline, and we’ll tell you plainly if that’s all you need. Call (877) 644-8036 for an exact quote on top plate or cap replacement in Georgetown.
Yes. A DuraFlex prefab fireplace runs through factory-built chimney sections and a termination cap, not a masonry flue. The sections, cap, chase cover, and flashing get inspected and cleaned differently, and the clearances and components are brand-specific. We clean and service DuraFlex prefab systems throughout Georgetown and provide DuraFlex repair in Round Rock according to the manufacturer’s installation specs, not a generic masonry sweep procedure.
DuraFlex chimney cleaning in Georgetown typically runs $180 to $340 depending on the liner type, creosote stage, and whether the system is a masonry reline or a prefab fireplace. A rotary removal of glazed creosote and a new top plate or cap will add to that range. Call (877) 644-8036 for an exact quote, estimates are free and we’ll show you the condition with a camera before any work starts.
Book Your DuraFlex Service in Georgetown, TX
If you own a DuraFlex-lined fireplace or prefab chimney in Georgetown, don’t wait until the first cold snap to find out what’s sitting in your flue. Call (877) 644-8036 today for a free estimate on DuraFlex cleaning, inspection, or repair. We serve Georgetown, offer DuraFlex repair in Brushy Creek, and the Williamson County area with straight answers and specification-grade parts.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Georgetown and Williamson County for over a decade.