Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Georgetown?
In Georgetown, a chimney liner replacement typically runs $2,400 to $6,200 depending on liner type, flue height, and whether the chimney needs structural repair. A partial chimney rebuild (crown, top courses, or firebox) usually costs $1,800 to $7,500, while a full-height rebuild of a masonry chimney can reach $12,000 to $22,000. Most single-story Georgetown homes with a straightforward stainless reline land near the lower end, in the $2,800 to $3,900 range.
Those numbers cover the liner, insulation, cap, and labor for a certified crew. What pushes a quote higher is almost always what we find once the flue is opened up: cracked mortar joints, a failed crown, or a previous “repair” done with the wrong material. We give you the range before we start, not after.
Key Takeaways
- Stainless steel liner replacement in Georgetown: $2,400 – $6,200, most jobs around $3,000 – $3,800.
- HeatShield liner resurfacing (when the existing liner is sound enough to restore): $1,600 – $3,400, often less than a full reline.
- Partial rebuild (crown and top courses): $1,800 – $7,500. Full rebuild: $12,000 – $22,000.
- Cost drivers here are limestone masonry, tall flues on two-story Georgetown homes, and freeze-thaw damage on north-facing stacks.
- Free estimates at (877) 644-8036. We quote the range, then the exact number after inspection.
If you want the full picture of how relining and rebuilding fit together, our Chimney Liner & Rebuild in Georgetown page walks through the process from inspection to final cure.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s what Georgetown homeowners actually pay, line by line. These ranges reflect the local market as of 2026 and include materials from professional supply lines, not retail substitutes.
| Service | Typical Cost Range | Notes |
|---|---|---|
| Stainless steel liner (6″, single-story) | $2,400 – $3,900 | DuraFlex flexible system, insulated, with cap |
| Stainless steel liner (two-story, tall flue) | $3,800 – $6,200 | More footage, more scaffold time |
| HeatShield liner resurfacing | $1,600 – $3,400 | Restores a sound clay liner; no full tear-out |
| Liner insulation wrap | $300 – $700 | Improves draft and protects against creosote |
| Crown rebuild (partial) | $1,800 – $4,200 | Common on 1990s and older stacks |
| Top courses rebuild (3 – 6 courses) | $2,600 – $7,500 | Freeze-thaw spalling at the cap |
| Firebox rebuild | $1,900 – $5,500 | HeatShield or refractory brick |
| Full masonry chimney rebuild | $12,000 – $22,000 | Structural failure; full-height |
| New chimney cap and spark arrestor | $250 – $650 | Stainless or copper, per Olympia/Famco spec |
| Flue tile replacement (single section) | $600 – $1,400 | Per tile, access-dependent |
What moves a Georgetown quote up or down most: the liner system and the condition of what’s already in the flue. A straight vertical run with a sound clay liner holds cost down. A flue offset, a crumbling crown, or a chimney that shares a chase with a furnace vent pushes labor and material higher. We source liners from DuraFlex for most relines, use HeatShield resurfacing when the original liner is intact enough to restore, and finish with caps and components from Olympia Chimney, Gelco, Famco, or Copperfield. Those parts cost a little more than the generic options on a big-box shelf, and they’re the ones that hold up through a Texas summer and the occasional hard freeze.
What Affects Chimney Liner & Rebuild Pricing in Georgetown
- Liner material and brand. A flexible stainless DuraFlex liner costs more than an aluminum or generic substitute, but it’s rated for wood, gas, and oil and won’t fail from heat or creosote attack. The right material for the repair is the difference between a 20-year liner and a callback in five.
- Flue height and geometry. Two-story Georgetown homes near the courthouse square and along the San Gabriel corridor often run 25 to 32 feet of flue. Every extra foot is material and time, and an offset or angle adds complexity.
- Masonry condition. Georgetown has a lot of limestone and brick chimneys built in the 1970s through 1990s. North-facing stacks take the freeze-thaw hit and spall at the crown. Once we’re up there, we price the rebuild honestly.
- Whether resurfacing is an option. HeatShield resurfacing can restore a cracked but structurally sound liner at roughly half the cost of a full reline. Not every flue qualifies, but when it does it’s the smarter spend.
- Access and roof pitch. Steep roofs, tight side yards, and capped chases slow the job. We quote from an inspection, not a phone description.
- Gas vs. wood appliance. A gas insert reline is often shorter and simpler than a wood-burning fireplace liner. A wood stove with a rear exit can be the most involved.
One local pattern worth naming: in the Sun City and Cimarron Hills neighborhoods, we regularly see original 1990s flue tile with hairline cracks that no one notices until a sweep. Cracks let heat and carbon monoxide reach framing. That’s the moment a $200 cleaning becomes a liner conversation, and it’s better to know now than after a chimney fire. If your home is in that age range and has never been scoped, that’s the check to schedule first. You can start from our home page.
How to Save on Chimney Liner & Rebuild
Chimney work isn’t the place to chase the cheapest bid, but there are real ways to keep the number down without cutting safety corners.
- Get the inspection before the emergency. A routine sweep and scope finds a hairline crack before it becomes a rebuild. Catching a failed crown at $2,000 beats a full rebuild at $15,000.
- Ask about resurfacing first. If your clay liner is intact enough, HeatShield resurfacing can save you $800 to $2,000 over a full stainless reline. We’ll tell you which one your flue actually needs.
- Bundle the sweep with the repair. Found during the sweep, fixed by us. One call covers the sweep, the vent, and the repair, and you’re not paying two crews to access the same roof.
- Don’t skip liner insulation to save $300. Uninsulated liners draft poorly and collect creosote faster, which costs you more in cleanings and risk.
- Pair it with a dryer vent cleaning. Dryer vents and chimneys share the same stakes: lint and creosote both cause structure fires. Handling both in one visit is efficient and safer.
Every estimate we give is free and itemized. Call (877) 644-8036 and we’ll set up a time to scope the flue and quote the range before any work begins.
FAQs – Chimney Liner & Rebuild Cost
How much does it cost to rebuild a chimney liner in Georgetown?
Rebuilding a liner usually costs $2,400 to $6,200 in Georgetown, with most single-story homes landing around $3,000 to $3,800. That covers a stainless DuraFlex liner, insulation, cap, and labor. If the existing clay liner can be restored with HeatShield resurfacing instead of torn out, expect roughly $1,600 to $3,400. Call (877) 644-8036 for a free estimate on your specific flue.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when it’s a real repair: $1,600 to $3,400 for resurfacing versus $2,400 to $6,200 for a full reline. The catch is that resurfacing only works if the existing liner is structurally sound. Cracked sections that have separated from the masonry, or a flue that’s lost large chunks of tile, need replacement. We scope the flue and tell you which applies before you spend a dollar.
What’s the cost of a full chimney rebuild in Georgetown?
A full masonry chimney rebuild runs $12,000 to $22,000, depending on height, stone or brick, and how much of the stack is failing. That’s the top of the range and it’s reserved for structural problems like leaning stacks or completely failed mortar. Most Georgetown rebuilds we quote are partials: a crown or the top courses, at $1,800 to $7,500. If you’re unsure which side of that line you’re on, call (877) 644-8036.
Can you come out today?
Often, yes. We schedule inspections quickly, and a same-week sweep-and-scope visit is standard for most Georgetown addresses. If you’ve had a chimney fire, smell gas, or notice crumbling mortar inside the firebox, say so when you call (877) 644-8036 and we’ll prioritize it.
Do I need a liner if I only burn occasionally?
Yes. A liner is required whenever a flue is used, regardless of frequency, and part of the cost range ($2,400 to $6,200) reflects that it’s a safety system, not a convenience. Carbon monoxide and heat don’t wait for a heavy fire schedule. Even a handful of fires a year into an unlined or cracked flue puts framing at risk. Call (877) 644-8036 for a free inspection and exact range.
Why Resolute for Chimney Liner & Rebuild in Georgetown
Resolute Chimney Sweep does three things: chimney sweep, dryer vent cleaning, and chimney repair. That scope matters here because liner and rebuild work is the repair side of the sweep. We don’t discover a cracked liner and hand you a referral. Found during the sweep, fixed by us, using the same professional components specified by industry standards. Our liners come from DuraFlex, resurfacing from HeatShield, and our caps and components from Olympia Chimney, Gelco, Famco, and Copperfield, all sourced through professional chimney supply channels rather than a retail shelf.
Resolute means we see it through. The sweep is where we find the problem. The rebuild is where we close it. One call covers the sweep, the vent, and the repair, and you’re dealing with one qualified company from the first scope to the finished crown.
Contact Us for a Free Estimate
If you’re in Georgetown and want a real number for a liner or rebuild, call (877) 644-8036 for a free estimate. We’ll scope the flue, tell you whether resurfacing or a full reline is the right call, and quote the range before any work begins. No pressure, no surprises, just the right material for the repair and a crew that finishes what it starts.
Pricing reflects the Georgetown market as of 2026. Resolute Chimney Sweep offers free estimates – call (877) 644-8036.
What Our Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Rami Haddad"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
— Emily Thompson"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Rana Khalil