Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Georgetown?
Chimney Repair in Georgetown typically runs $285 to $1,850, with most common repairs (cracked crown, mortar joints, a damaged cap) landing between $350 and $900. A full liner replacement to bring an older flue up to current code usually falls in the $1,900 to $4,200 range. Those ranges assume a residential chimney, standard roof access, and materials that hold up to Central Texas heat and freeze-thaw swings.
If you’ve had a sweep out this season and heard “your crown is shot” or “that liner has cracks,” this guide breaks down what each repair actually costs here in Georgetown so you can plan the work without guessing. Every number below reflects the local market, not a national average.
Key Takeaways
- Most Georgetown chimney repairs cost $350 to $900; full relining runs higher, into the low four figures.
- A masonry crown repair is usually the cheapest fix and the one that prevents the most expensive damage later.
- HeatShield liner resurfacing can save an intact chimney from a full tear-out in many cases, and it costs less than a complete DuraFlex reline.
- Repairs found during a sweep can be handled in the same service relationship, so you’re not hunting for a second contractor.
- Free estimates over the phone or on-site are the fastest way to turn a range into an exact number: (877) 644-8036.
Chimney Repair Cost Breakdown (2026)
Here’s how the line items break down for the Georgetown market. Treat these as planning ranges. The only way to know your exact figure is an on-site look, because two chimneys on the same street can need very different work.
| Repair | Typical 2026 Cost (Georgetown) | What It Covers |
|---|---|---|
| Crown repair or rebuild | $350 to $850 | Sealing cracks or pouring a new crown to shed water away from the flue |
| Mortar joint repointing | $450 to $1,200 | Grinding out and repacking deteriorated mortar in the brick stack |
| Chimney cap replacement | $285 to $650 | New stainless or multi-flue cap to block rain, animals, and sparks |
| Flue tile crack repair | $400 to $1,100 | Patching or replacing cracked clay tiles in the flue |
| HeatShield liner resurfacing | $1,200 to $2,400 | Resurfacing an intact but cracked liner back to a smooth, sealed flue |
| Full liner replacement (DuraFlex) | $1,900 to $4,200 | Installing a new flexible stainless liner sized to the appliance |
| Firebox repair | $600 to $2,200 | Rebuilding damaged firebox brick and refractory mortar |
| Smoke chamber parging | $500 to $1,400 | Reshaping and sealing the smoke shelf and chamber for proper draft |
What pushes a job toward the top of a range? Access is the big one. A steep roof pitch, a tall stack, or a chimney boxed in against a wall adds labor hours before a single brick gets set. Material choice matters too: matching older Georgetown brick and sourcing professional-grade components from lines like Olympia Chimney or Copperfield costs more than a generic off-the-shelf patch, but it holds. And scope compounds. A crown plus repointing plus a cap done in one visit is usually cheaper than three separate service calls, which is one reason we like catching these things during the sweep.
What Affects Chimney Repair Pricing in Georgetown
Georgetown isn’t like a lot of the country, and the local conditions shape what fails and what it costs to fix. Here are the factors we weigh on every estimate.
- Central Texas heat and clay soil. Our summers bake the masonry and our clay soils shift with the wet-dry cycle. That movement is why we see so many hairline crown cracks around Sun City and the older blocks near the Square, where homes have been settling for decades. Catching a crown crack early is a few hundred dollars; letting water in is thousands.
- Freeze-thaw swings in winter. Georgetown gets just enough hard freezes to matter. Water that seeps into a cracked crown or mortar joint expands overnight and pries the masonry apart. The damage is cumulative, so a repair deferred one season often costs more the next.
- Age of the home. The historic homes near Downtown Georgetown and along the old neighborhoods often have clay flue tiles that have cracked after decades of heating cycles. Some are candidates for HeatShield resurfacing; others have gone too far and need a full DuraFlex reline. The inspection tells you which.
- Roof access and chimney height. A single-story ranch with an easy-pitch roof is a simpler job than a two-story with a steep gable. Height and pitch drive ladder and staging time, and that shows up in the estimate.
- Appliance type. A wood-burning fireplace, a wood stove, and a gas appliance each need different liner sizing and venting. A gas insert that was vented into an oversized old flue can need a correctly sized liner to run safely, which changes the scope.
- How much is done at once. Bundling the crown, cap, and repointing into one visit usually beats spacing them out. One call covers the sweep, the vent, and the repair.
Why the Material and Method Change the Price
You’ll get wildly different quotes for the “same” repair, and the gap is almost always in the materials and the method. A cheap liner is cheap because it’s thin and generic. A liner installed to spec comes from a professional supply line and is sized to the appliance and the flue. That’s the difference between a fix that lasts and a callback in three years.
We stock and install DuraFlex flexible liner systems for relining work, and we use HeatShield for liner resurfacing, a technically demanding process that restores a cracked but otherwise sound flue without tearing it out. Our components come from Olympia Chimney, Gelco, Famco, and Copperfield, brands sold through professional chimney supply channels rather than the home-improvement aisle. When a repair calls for a specific component, we source the one the industry standards specify, not the fastest substitute.
That partly explains why our quotes sometimes sit a little higher than a handyman’s. You’re paying for the right material for the repair and a method that holds. If a masonry problem surfaces during a sweep, we can resolve it in the same service relationship rather than referring you out. That’s what Resolute means: we see it through, from discovery to correction.
How to Save on Chimney Repair
The best savings in chimney work come from timing, not haggling. A few practical moves:
- Fix the crown before it becomes a liner. A few hundred dollars now on crown sealing prevents water intrusion that can wreck the flue and firebox later. This is the single most cost-effective chimney repair on the list.
- Book in the shoulder season. Late spring and early fall are slower, and scheduling flexibility often works in your favor. The fall rush is real, and repairs booked in a crunch cost more in time and hassle.
- Bundle the visit. Have the crown, cap, and repointing done together. One trip, one setup, one bill beats three separate service calls every time.
- Take the free estimate seriously. A quick on-site look turns a range into a real number, and it tells you whether you’re looking at a resurfacing job or a full reline. Call (877) 644-8036 and we’ll price it before any work starts.
- Keep up with the annual sweep. Catching a cracked liner or a failing joint during a cleaning is far cheaper than finding it after a chimney fire or a water leak. The home visit that catches it early pays for itself.
When a Repair Makes More Sense Than a Rebuild
Homeowners often ask whether they’re better off repairing or replacing the whole chimney. In most Georgetown cases, repair wins. A chimney with sound structure and one failed component (a crown, a cap, a set of mortar joints) is a repair, not a rebuild. Full rebuilds are for chimneys with structural failure, and they run well into five figures, so they’re a decision worth making carefully.
The one place we steer people toward the bigger job is the liner. If the clay tiles are badly damaged and the flue isn’t a candidate for resurfacing, a full reline with a DuraFlex system is the right call, and it’s money well spent because it’s what keeps the appliance venting correctly. If you want the full picture on structural repair, our Chimney Repair in Georgetown page walks through the options in more detail. Our chimney sweep and inspection service is where most of these problems get found in the first place.
Why Georgetown Homeowners Call Resolute
Chimneys and dryer vents share the same stakes: both carry heat and exhaust out of the house, and both fail dangerously when they’re neglected. A clogged dryer vent is a leading cause of residential structure fires, and a cracked chimney liner lets heat and carbon monoxide reach places they shouldn’t. We handle all three services under one roof: sweep, dryer vent cleaning, and repair. That means one qualified company handles discovery, cleaning, and correction, and you’re not juggling contractors.
Our dryer vent cleaning service covers the exhaust category most chimney-only companies skip entirely. Whether you’re in Sun City, near the Square, or out toward the lake, the same crew that sweeps your flue can clear your dryer vent and repair what needs fixing. One call covers it.
Chimney Repair Cost FAQs
How much does the most common chimney repair cost in Georgetown?
Most common repairs land between $350 and $900. Crown repair, mortar repointing, and cap replacement make up the bulk of that range. Call (877) 644-8036 for an exact quote; estimates are free.
Is it cheaper to repair or replace a chimney liner?
Repair is cheaper when the flue is a candidate for resurfacing, which runs about $1,200 to $2,400 versus $1,900 to $4,200 for a full reline. HeatShield resurfacing restores a cracked but structurally sound liner; a badly damaged one needs a full DuraFlex replacement. The inspection tells you which side of that line you’re on. Call us to find out.
How much does a chimney crown repair cost in Georgetown?
A crown repair or rebuild typically runs $350 to $850. It’s the cheapest line item on the list and the one that prevents the most expensive damage, since a failed crown is how water gets into the masonry. Call (877) 644-8036 to get yours priced.
Can you come out today?
Often yes, depending on the schedule and the scope. Simple repairs can frequently be quoted and handled quickly once we see the chimney. Call (877) 644-8036 and we’ll tell you the soonest available window, and estimates are free either way.
Why do quotes for the same repair vary so much?
Material quality and method account for most of the spread, often $200 to $600 on a comparable job. A quote that uses a thin generic liner and a quick patch costs less up front and more over time. We spec professional-grade components from DuraFlex, HeatShield, and the Olympia, Gelco, Famco, and Copperfield lines so the repair holds. Call for a straight comparison.
Get Your Exact Georgetown Chimney Repair Price
Ranges get you planning. A free on-site estimate gets you the real number, and we’ll tell you plainly which repairs are needed now and which can wait a season. Whether it’s a cracked crown, a failing liner, or a dryer vent that hasn’t been cleared in years, one call covers the sweep, the vent, and the repair. Call Resolute Chimney Sweep at (877) 644-8036 for a free estimate, and we’ll see it through.
Pricing reflects the Georgetown market as of 2026. Resolute Chimney Sweep offers free estimates. Call (877) 644-8036.
What Our Customers Say
"Level two inspection before we bought the house. The report was detailed enough to use as a negotiating point and he explained every photo in it."
— Rana Khalil"Good work. The written inspection report took about a week to arrive after I asked for it, which was slower than I expected."
— Scott Fletcher"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Beatriz Guzman