Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Wells Branch
Dryer vent cleaning in Wells Branch costs $129 – $189 for a standard single-dryer home, with camera inspection included on every job. Most appointments in the 78728 zip code can be scheduled within 3 – 5 business days, and we’ll give you the exact price before we start. If you live in Wells Branch and you haven’t had your dryer duct cleaned in over two years, call (877) 644-8036 now for a free estimate.
Here’s what sets our work in Wells Branch apart: we know the exact floor plans. The subdivision was built out in the late 1980s through mid-1990s, and the same builder models repeat street after street off Wells Branch Parkway, Shoreline Drive, and throughout the 78728 zip. That means we recognize the chase configuration, flue style, and dryer duct routing from the driveway before we even climb. You won’t get a technician who’s seeing your house for the first time.
We’re a Dryer Vent Cleaning company that also sweeps chimneys and repairs chimney systems. Our owner, Brent Calloway, built Resolute Chimney Sweep around one principle: show the customer the problem with their own eyes before recommending any work. In Wells Branch, where aging prefab fireplaces and undersized dryer ducts share the same exterior assembly, that principle matters more than almost anywhere else we work.
Why Resolute Chimney Sweep Is Wells Branch’s Preferred Dryer Vent Cleaning Company
We didn’t become the preferred dryer vent cleaner in Wells Branch by being the cheapest bid. We got there by doing the job the same way every time: from the dryer connection to the exterior termination, with camera footage showing you what we found, and a flat price agreed before any cleaning begins. Homeowners in Wells Branch call us because they want a specialist, not a handyman with a shop vac.
The houses here demand that kind of attention. Most were built between 1987 and 1995 as brick-veneer two-story tract homes. Many of those original floor plans routed dryer ducts through short, undersized runs that were barely adequate in 1990, let alone for modern high-lint appliances. When we clean a dryer vent in Wells Branch, we’re typically the first person to inspect that duct in 25 or 30 years.
Brent Calloway has built our team around follow-through. If a cleaning reveals a crushed duct, a birds nest in the termination, or lint packed against a weathered chase cover, we can fix it. We don’t hand you a list and refer you to three other contractors. We carry the parts, we show you the camera evidence, and we give you a written quote on the spot. That’s why Wells Branch homeowners keep our number.
Our service area for Wells Branch covers the entire 78728 zip: the streets off Wells Branch Parkway, the loop through Mills Pond, the neighborhoods around Katherine Fleischer Park, and the older sections along Shoreline Drive. We know the floor plans. We know the access points. We know which models have the dryer venting into the same chase as the prefab fireplace, because we’ve cleaned dozens of them.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Wells Branch
Full Dryer Vent Cleaning from Dryer to Exterior Termination
We clean the entire run, not just the lint trap. In Wells Branch, that matters because so many original ducts were installed with flexible foil or vinyl transition tubing that has long since crushed behind the appliance. We pull the dryer, inspect the connection, run our rotary brush and vacuum the full length of the duct, and confirm strong airflow at the exterior hood.
What does a typical Wells Branch duct look like when we open it? Packed with years of accumulated lint, pet hair, and in some cases fragments of the original vinyl duct liner that have broken down from the heat. We remove it all, and we show you the before and after.
Camera Inspection of the Dryer Vent Run
Every dryer vent cleaning in Wells Branch includes camera inspection. We push a small camera through the full duct run and you watch the screen with us. If there’s a separation inside the wall, a crushed section, or lint bypassing into a shared chase, you’ll see it yourself. We never ask you to take our word for a repair.
In the repeat builder models off Wells Branch Parkway, we often find ducts that sag or separate at the mid-point connection. The camera shows exactly where the failure is, which means the repair quote is precise, not a guess.
Dryer Vent Cap and Termination Check
The vent cap is the part of your dryer exhaust system that takes the most weather, and in Wells Branch’s hot, humid summers and occasional hard freezes, old plastic or thin-metal caps fail. A broken flap lets in birds, wasps, and outside humidity, which then mixes with lint inside the duct and creates a thick paste that’s much harder to clear.
We check the cap on every job and replace failed caps with weather-rated metal terminations. If the cap sits on the same wall as your prefab fireplace chase, we’ll inspect the chase cover too, because that’s a common failure point on 30-year-old Wells Branch homes.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Wells Branch
When repair or replacement is needed, we don’t use whatever the hardware store has in stock. We install dryer vent components and chimney parts from the same professional lines we trust on every job. For chimney liner work, we carry DuraFlex flexible liner systems and use HeatShield resurfacing products when a liner can be restored rather than replaced. For termination caps, chase covers, and dryer vent hoods, we source from Gelco, Olympia Chimney, Famco, and Copperfield. These are the brands sold through professional chimney supply channels, not retail home improvement chains. Wells Branch homeowners get the right material for the repair, installed correctly.
See the difference
Before
After
Before
After
Before
AfterCommon Dryer Vent Cleaning Problems We See in Wells Branch Homes
- Crushed foil or vinyl duct behind the appliance. The original flexible transition tubing installed in late-1980s and early-1990s Wells Branch models has simply failed. The duct collapses behind the dryer, reducing airflow to near zero while the dryer appears to work, and lint packs against the restriction.
- Lint bypassing into a shared prefab chimney chase. Several Wells Branch floor plans route the dryer duct alongside or into the same exterior chase as the prefabricated fireplace. When the duct separates or the chase cover rusts through over 30 years of Texas sun and storms, lint builds up inside the chase and becomes a fire hazard.
- Birds and wasps nesting in outdoor terminations. Central Texas’s mild winters mean birds nest year-round, and a broken or missing vent cap flap is an open invitation. A nest inside the duct can block 80% of airflow before you notice anything.
- Hardened lint paste from humidity. Wells Branch’s hot, humid summers introduce moisture into the duct, especially when the vent cap is cracked. Moisture plus lint over months creates a dense, paper-mache-like layer that a standard brush alone won’t remove. Our rotary system strips it.
Pricing for Dryer Vent Cleaning in Wells Branch, TX
A standard dryer vent cleaning in Wells Branch runs $129 – $189. That covers a single dryer, full duct cleaning from appliance to exterior cap, camera inspection, and the termination check. The price depends on duct length, accessibility, and whether we’re dealing with rooftop or second-story terminations, which are common on the two-story Wells Branch models.
If the camera reveals a crushed duct, failed termination, or a vent tied into a deteriorated chimney assembly, the repair is a separate quote that we provide only after you’ve seen the footage. We don’t upsell. We don’t recommend work that can wait. In Wells Branch, where prefab fireplaces and dryer ducts often share the same aging chase, we’ll tell you plainly what needs attention now and what doesn’t.
You’ll get the exact price before any work begins. Call (877) 644-8036 and we’ll quote your specific home over the phone.
We Also Serve Cities Near Wells Branch
Based in Georgetown, we serve Wells Branch and the neighboring communities of Windemere, Pflugerville, Anderson Mill, and Jollyville. If your home sits just outside the 78728 boundary, call us anyway. Our service scheduling accounts for the cluster of neighborhoods along I-35 and Mopac, and we often run multiple jobs per day through the area.
Serving Wells Branch, TX — Our Local Coverage Area
We’re based in the Wells Branch area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Wells Branch
Your dryer still dries because the heating element and blower keep pushing air against a slowly worsening restriction. The appliance works harder, uses more electricity, and runs longer cycles while lint packs tighter inside the duct, but you won’t feel the difference until the clog is severe. In Wells Branch’s 1980s-90s tract homes, where original ducts were often undersized and lined with vinyl that has since broken down, the restriction builds faster than you’d expect. Cleaning is far cheaper than the motor replacement or the fire risk that comes with ignoring it. Call (877) 644-8036 for an exact quote.
It’s common in the builder models that repeat throughout Wells Branch, but it’s not a good design. Those floor plans often route the dryer duct up the same exterior chase as the prefabricated fireplace, sharing the same weather-exposed assembly. After 30 years, the chase cover rusts, the duct separates, and lint builds up inside a cavity you can’t see. We inspect that configuration on nearly every job in the 78728 zip, and we use the camera to show you exactly what’s happening inside that shared space.
No. The cleaning itself we perform every time, no camera conditions attached. But if the camera reveals a collapsed duct, a cracked chase cover, or a vent tied into a deteriorated chimney flue, we won’t declare it a hazard and hand you an urgent invoice. We’ll show you the footage, explain what we saw, and tell you plainly whether the repair should happen now or can wait. In Wells Branch, where many original owners have never had their dryer duct inspected, we find plenty that needs attention. Nothing gets recommended without evidence you can see yourself.
Every 18 to 24 months for a household of two to four people. If you’re a larger family, run heavy loads daily, or have pets that shed, clean it annually. Wells Branch’s humidity adds another variable: cracked vent caps let in moist air that mixes with lint and creates a dense blockage faster. The homes here with older vinyl ducts and 30-year-old terminations sit at the shorter end of that range.
Only if the camera shows damage to the flue or chase that our technician believes is a real safety issue, and even then, we’ll show you the footage before any quote. We do carry DuraFlex liners and we do install HeatShield resurfacing when a chimney liner needs restoration, but a dryer vent cleaning is not a setup for a liner sale. If your flue is fine, we’ll tell you it’s fine. If it’s not, you’ll see the evidence on the screen. That’s the same standard we hold on every Wells Branch job.
Call (877) 644-8036 to schedule your dryer vent cleaning in Wells Branch. You’ll get a free estimate, a firm price before work starts, and camera evidence of everything we find.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Wells Branch and the surrounding communities.