Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Taylor
A chimney sweep in Taylor, TX typically costs $189 – $325 for a standard cleaning with a Level 1 inspection, and most jobs are done in 60 – 90 minutes. Resolute Chimney Sweep serves every ZIP in Taylor, including 76574, with a team that knows the older downtown masonry stacks and the newer prefab fireboxes on the city’s edges equally well. If you’re in Taylor and your fireplace hasn’t been swept in over a year, call (877) 644-8036 for a free estimate. We don’t rush the job, and we don’t brush a flue we haven’t inspected first.
Why Resolute Chimney Sweep Is Taylor’s Preferred Chimney Sweep Company
Taylor homeowners call us because we treat a sweep as an inspection first and a cleaning second. Brent Calloway built Resolute Chimney Sweep around a simple standard: nothing gets brushed until we know what’s actually in the flue and what condition the stack is in. That matters in Taylor, where the in-town blocks off Main Street and around Murphy Park hold original 1920s brick chimneys that most companies only ever see from the ground with a flashlight.
We’re not a franchise crew running a dozen towns a day. Our techs work Taylor’s streets regularly, from the bungalows near the high school to the newer subdivisions east of town. They know the difference between a prefab metal firebox on the edge of Taylor and a 1900s unlined masonry flue downtown, and they plan each job accordingly. When a Taylor customer books a sweep, we arrive with the right rods, brushes, inspection camera, and repair materials on the truck, not just a shop vac and a bus ticket.
Brent Calloway has built the company around a vetted roster of professional-grade products: HeatShield for liner resurfacing, Gelco for chimney components, and Olympia Chimney for caps and dampers. That’s the same supply chain certified chimney professionals use, and it means any repair we recommend in Taylor uses materials rated for the job, not whatever’s on the shelf at the local hardware store.
Styles & brands we work with
Chimney Sweep Services in Taylor
Chimney Sweep Services in Taylor start with a Level 1 inspection, then proceed to mechanical brushing of the flue to remove creosote, soot, and any debris we find. On older Taylor homes, we often add a Level 2 inspection when there’s any sign of a shared stack, a cracked crown, or a liner question, because you can’t safely brush a flue you haven’t mapped. A standard sweep in Taylor runs $189 – $325. Level 2 inspections run $250 – $450 when done as part of the visit.
Creosote and Soot Removal
Creosote is the residue wood fires leave behind, and it’s flammable. In Taylor’s mild climate, fireplaces sit idle for months, which lets that residue harden into a glaze that a basic brush pass won’t remove. We use mechanical methods appropriate to the buildup level, and we’ll tell you plainly if a chemical treatment or a second pass is needed. Soot removal is part of every sweep we do in Taylor, but we don’t charge separately for it.
Level 1 and Level 2 Inspections
A Level 1 inspection covers what’s readily accessible: firebox, damper, cap, and flue from top and bottom. A Level 2 goes further with a camera, which is what we recommend for any Taylor home with an unlined flue, a shared stack, or a chimney that hasn’t been swept in years. If you’re buying a home in Taylor’s older core, a Level 2 is the inspection that tells you whether that charming 1920s fireplace is actually safe to use. We report what we see, with photos, and we never recommend a liner or rebuild without camera evidence you can look at yourself.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Cleaning in Taylor
Chimney Cleaning in Taylor means more than running a brush up a flue. On a pre-1950s home near downtown Taylor, it means tracing which appliance vents into which flue before a single brush goes up. On a newer prefab unit off FM 973, it means checking the firebox panels and the pipe connection, not just the flue. Standard cleaning runs $189 – $325 for Taylor homes. When we find cracks, spalling mortar, a seized damper, or a failed cap during cleaning, we can quote the repair on the spot, and most of it can be done by our own crew.
Fireplace and Annual Sweep
An annual sweep in Taylor is the most reliable way to catch problems before the first cold snap. The National Fire Protection Association recommends a sweep whenever there’s 1/8 inch or more of creosote buildup, and for wood-burning fireplaces that’s usually once a year. Taylor’s short winters mean chimneys sit dormant for eight or nine months, which is plenty of time for birds, squirrels, and wasps to move in. We’ll remove nests, inspect the cap and crown, and tell you what condition the flue is in.
Prefab Firebox and Wood Stove Cleaning
Newer Taylor homes with prefab metal fireboxes still need regular cleaning, and the inspection points are different from masonry. We check the refractory panels, the pipe joints, and the termination cap, not just the inside of the box. Wood stoves on Taylor properties get the same treatment, including the connector pipe, which is where creosote accumulates fastest in that setup.
Trusted Brands We Service in Taylor
We stock and install professional-grade components from HeatShield, Gelco, and Olympia Chimney for Taylor customers. When a sweep in an older Taylor home turns up a liner that can’t be saved, HeatShield resurfacing is often the right answer instead of a full teardown, and it’s a repair most basic sweep companies don’t offer. Gelco liner components and Olympia Chimney caps and dampers go on trucks headed to Taylor every week, so turnaround on parts isn’t a week-long wait through a retail chain. If it gets specified for a flue in Taylor, it’s because it matches the stack, not because it was cheapest.
Common Chimney Sweep Problems We See in Taylor Homes
- Shared stacks in older attached homes. Near downtown Taylor, it’s common for a fireplace flue and a neighbor’s water heater or furnace vent to share the same masonry stack. Brush just the fireplace flue and you can leave combustion gases migrating through a cracked smoke chamber into the wrong space.
- Unlined 1900s flues with glazed creosote. Taylor’s pre-1950s bungalows often have no clay liner at all. A handful of fires can glaze the brick interior, and a standard brush won’t touch it. This is a third-degree creosote situation, and it’s a fire hazard.
- Dormant-season animal and bird entry. Months of idle time in Taylor means squirrels, birds, and wasps move into uncapped or poorly capped chimneys. We routinely pull nests out of downtown Taylor stacks on the first cold-week calls.
- Cracked crowns and failed flashing on older masonry. Taylor’s vintage brick chimneys take a beating from Central Texas summer heat and occasional hard rain. Spalling crown mortar lets water into the stack, which is how you end up with a crumbling smoke chamber instead of just a dirty flue.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Taylor, TX
A standard chimney sweep in Taylor runs $189 – $325, and that includes a Level 1 inspection with the cleaning. Level 2 inspections, which we recommend for older masonry stacks and shared flues, add $250 – $450. If we find damage, the repair quote is separate and itemized, and you’ll see camera photos before you’re asked to approve anything. Liner resurfacing with HeatShield starts around $2,800 in Taylor’s market, depending on flue height and condition. Full relining with DuraFlex runs higher. These are honest ranges for Taylor, not bait numbers. Call (877) 644-8036 for a free estimate on your specific chimney.
We Also Serve Cities Near Taylor
Resolute Chimney Sweep serves Hutto, Round Rock, Pflugerville, and Windemere alongside our work in Taylor. While Taylor gets our focus for older masonry and shared-stack work, nearby owners get the same inspection-first standard. If you’re just outside Taylor and need a sweep, you’re in range. Call and ask.
Serving Taylor, TX — Our Local Coverage Area
We’re based in the Taylor area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Taylor
We typically schedule Taylor sweeps within 3 – 7 days, and we route multiple Taylor jobs on the same day when possible. We’re based nearby in Georgetown, so Taylor isn’t an edge case for us. The first cold week of the season fills fastest. Call (877) 644-8036 to get on the schedule before the rush.
Yes, we serve all of Taylor, including 76574, from the downtown core near Main Street to the newer subdivisions east toward the Samsung fab corridor and south toward the high school. No part of Taylor is out of our area.
We service both. Prefab fireboxes on Taylor’s newer tract builds need cleaning and inspection just like masonry, and the inspection points are different: refractory panels, pipe joints, and termination caps. Older downtown Taylor masonry chimneys get the shared-stack and unlined-flue attention they require. Our Chimney Sweep team carries equipment for both.
Our standard sweep range in Taylor is $189 – $325, which tracks with our pricing across Williamson County. The bigger cost variable is what we find once we’re on the roof: a capped, lined chimney on a newer Taylor build is at the low end, while an unlined 1920s stack downtown with a stuck damper and a nest is at the high end, plus any repairs.
We stand behind our sweeps and repairs with a satisfaction warranty: if the chimney isn’t clean or the repair fails due to our workmanship, we come back and make it right at no charge. Products like HeatShield and Gelco carry their own manufacturer warranties that we’ll walk you through at the time of service. Call (877) 644-8036 for details on any specific repair.
One Call Covers the Sweep, the Vent, and the Repair in Taylor
If we find a problem during a Taylor sweep, we can fix it. That’s the whole point of working with a company that does repairs, not just cleanings. Cracked crown, deteriorating mortar, seized damper, liner that’s past saving: we handle all of it with materials from HeatShield, Gelco, and Olympia Chimney. Found during the sweep, fixed by us. And while we’re there, ask about dryer vent cleaning. Dryer vents and chimneys share the same stakes: combustion and exhaust safety in your Taylor home. One call covers all three. Call Brent Calloway’s team at (877) 644-8036 for a free estimate.
Written by Brent Calloway, Owner at Resolute Chimney Sweep, serving Taylor, TX and Williamson County.